The MGA With An Attitude
| MGAguru.com |
presents |
MGAguru.com |
MGA 1500 belonging to
Demis Aguilar, Havana, Cuba
The Wish List
For author's convenience, these will be Moss Motors part numbers
Best display with MS Internet Explorer browser & 800 wide display.
Best print with printer minimum side margins.
Status: Blank = part needed. P=pleged. $=purchased. R=received. S=shipped. D=delivered.
ENGINE, EXTERNAL
QTY PART-NO. DESCRIPTION Status Thank You to:
1 120-000 Seal, timing cover, rubber ___ _________________________
1 296-420 Gasket set, head set ___ ___
1 296-430 Gasket set, lower engine _R_ Kurt Nagle
4 324-626 Washer (copper), oil gauge union, ___ ___
transverse oil hole, oil pan, drain tap
3 324-800 Washer, copper (banjo bolt & oil adapter) ___ ___
1 324-650 Washer, fiber, relief cap ___ ___
1 324-670 Washer, fiber, water tap ___ ___
5 324-765 Washer 1/4" oval, timing cover ___ ___
2 325-245 Drive rivet, number plate ___ ___
4 328-230 Core Plug ___ ___
1 328-282 Plug, oil pan, magnetic ___ ___
1 413-010 Engine mount, RH ___ ___
1 413-020 Engine mount, LH ___ ___
1 460-040 Dust cap, dipstick ___ ___
4 460-360 Washer 5/16" oval, timing cover ___ ___
1 460-470 Washer, lock tab, crank pulley ___ ___
1 460-670 Seal, tach drive pinion ___ ___
ENGINE, INTERNAL
QTY PART-NO. DESCRIPTION Status Thank You to:
1 330-160 Bushing, spigot ___ _________________________
1 425-**0 Main bearing set,1500-1600 (size not known) ___ ___
1 425-**0 Rod bearing set,1500-1600 (size not known) ___ ___
1 451-520 Crankshaft, 1500-1600 (serviceable/restorable) ___ ___
1 460-005 Lock Tab set, fwheel crods tensioner cam crank ___ ___
1 460-560 Tensioner, timing chain ___ ___
1 460-590 Timing chain ___ ___
1 460-730 Oil pump, late style ___ ___
OIL SYSTEM
QTY PART-NO. DESCRIPTION Status Thank You to:
1 235-880 Oil filter, hanging (NAPA 1516) ___ _________________________
1 235-940 Adapter kit, spin on oil filter _R_ Kurt Nagle
1 435-335 Sealing ring, oil filter head ___ ___
1 460-830 Pipe Ass'y, filter to block, from eGB26933 ___ ___
CYLINDER HEAD
QTY PART-NO. DESCRIPTION Status Thank You to:
11 310-280 Nut, cylinder head, stock (tall) ___ _________________________
11 324-435 Washer, cylinder head, stock (thick) ___ ___
8 330-150 Bushing, rocker arm ___ ___
1 451-340 Rocker Shaft ___ ___
1 460-100 Oil cap, stock type MGA ___ ___
2 460-110 Cap nut, valve cover ___ ___
2 460-115 Distance piece (valve cover) ___ ___
4 460-120 Bushing, Rubber (valve cover) ___ ___
2 460-135 Washer, cupped, chrome (valve cover) ___ ___
8 460-220 Collar, valve spring (G-GK) ___ ___
4 460-250 Rocker arm (4 currently damaged) ___ ___
8 ___-___ Valve seal, rubber + Teflon, for standard ___ ___
for standard size guides, NAPA B45404, Felpro SS70373
COOLING
QTY PART-NO. DESCRIPTION Status Thank You to:
1 296-380 Gasket, thermostat ___ _________________________
1 434-190 Thermostat 190d ___ ___
ENGINE CONTROLS
QTY PART-NO. DESCRIPTION Status Thank You to:
1 331-090 Accelerator cable ___ _________________________
1 331-340 Starter cable ___ ___
1 331-350 Choke cable ___ ___
FUEL SYSTEM
QTY PART-NO. DESCRIPTION Status Thank You to:
1 293-400 Gasket set, sending unit ___ _________________________
1 323-728 Screw set, sending unit ___ ___
2 470-210 Seal, gas cap ___ ___
1 470-220 Hose, fuel filler ___ ___
EXHAUST
QTY PART-NO. DESCRIPTION Status Thank You to:
1 296-410 Gasket, manifold ___ _________________________
2 321-678 Bolt & nut set, rear & center hanger ___ ___
0 412-080 Hanger, exhaust center (rubber mount) ___ ___
1 470-138 Hanger ass'y, center (see 412-080) ___ ___
1 470-150 Hanger, exhaust rear ___ ___
2 470-170 Strap, short (pipe to back plate) ___ ___
2 470-230 Sealing ring, exhaust ___ ___
CLUTCH
QTY PART-NO. DESCRIPTION Status Thank You to:
1 180-200 Push rod, clutch ___ _________________________
0 180-720 Slave cylinder ___ ___
1 180-820 Hose, clutch ___ ___
1 180-960 Repair kit, slave cylinder ___ ___
1 190-290 Release bearing ___ ___
2 190-310 Retainer, release bearing ___ ___
1 190-550 Bolt, clutch lever, late MGA ___ ___
1 310-240 Nut, clutch lever, late MGA ___ ___
1 325-140 Clevis pin, clutch slave ___ ___
1 330-200 Bushing, release lever ___ ___
1 461-010 Boot, clutch lever ___ ___
GEARBOX
QTY PART-NO. DESCRIPTION Status Thank You to:
- ------- Input shaft ass'y:
1 120-300 Seal, trans front ___ _________________________
1 461-270 Lk-washer, front bearing nut ___ ___
2 461-280 Shim .002, front bearing thrust ___ ___
2 461-290 Shim .004, front bearing thrust ___ ___
1 442-298 Roller set (18 pcs), input shaft ___ ___
- ------- Main shaft ass'y:
1 121-100 Seal, trans rear, flanged shaft ___ _________________________
1 461-530 Bushing, third gear ___ ___
1 461-540 Ring, interlocking ___ ___
1 461-500 Bushing, Second gear ___ ___
2 461-520 Syncro ring, 3rd/4th ___ ___
6 329-550 Ball ___ ___
6 329-260 Spring ___ ___
1 461-490 Syncro ring, 2nd gear, brass (orig) ___ ___
1 461-365 Lk-washer, speedo drive gear, ___ ___
1 461-350 Peg, front thrust washer retaining ___ ___
1 329-250 Spring, front thrust washer retaining ___ ___
- ------- Lay shaft ass'y:
1 461-560 Shaft, laygear ___ _________________________
1 461-878 Bearing kit, laygear ___ ___
- ------- Reverse gear shaft ass'y:
3 461-650 Tab washer, reverse gear shaft ___ _________________________
- ------- External transmission parts:
1 158-413 Rear mount ___ _________________________
1 296-440 Gasket set, gearbox (w/ 0 shift gasket ___ ___
2 324-680 Washer, 5/16" fiber, side cover bolt ___ ___
1 324-820 Washer, pinion housing ___ ___
3 461-050 Lk-washer, c'sunk ___ ___
1 461-445 Seal, pinion shaft ___ ___
- ------- Shifting parts:
1 461-110 Bushing, 2-pc brass, rear selector ___ _________________________
(now nylon replacement type)
1 326-170 Clip for 461-110 bushing (original brass type) ___ ___
2 329-010 Spring, Remote damper & Rear lever ___ ___
2 329-510 Ball, rear lever ___ ___
3 329-520 Ball, detent for shift rods ___ ___
3 329-240 Spring, detent for shift rods ___ ___
FRONT SUSPENSION:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 120-600 Seal, front hub _R_ Gordie's Garage
8 264-010 Seal support, front suspension ___ ___
2 264-060 Spacer, rebound buffer ___ ___
4 264-070 Steel tube, front suspension ___ ___
2 264-290 Rebound buffer ___ ___
1 281-388 Seal set, front suspension ___ ___
1 280-498 Bushing set, HD MGB V8 type ___ ___
4 310-410 Nut, a-arm pivot ___ ___
2 321-558 Bolt & Nut, lower ___ ___
2 321-568 Bolt & Nut, upper ___ ___
8 324-510 Thrust washer, front suspension ___ ___
4 330-140 Bushing, front suspension ___ ___
1 311-450 Nut, RF hub (R/H thread) ___ ___
1 311-460 Nut, LF hub (L/H thread) ___ ___
STEERING:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 260-160 Felt bush, lower, steering ___ _________________________
1 260-170 Felt bush, upper, steering ___ ___
2 262-030 Seal, Pinion shaft, rack ___ ___
4 262-130 Shim, .003" (ball hsg) VB 5-4191 ___ ___
4 262-140 Shim, .005" (ball hsg) ___ ___
4 262-150 Shim, .010" (ball hsg) ___ ___
2 262-200 Clamp, small (st. boot) ___ ___
2 262-210 Clip, tie rod end ___ ___
2 262-220 Boot, tie rod end ___ ___
2 263-010 Rack seal (boot) ___ ___
1 263-110 Centerpiece for steering wheel, original ___ ___
4 263-200 Clip for centerpiece, original ___ ___
2 263-230 Clamp, large (st. boot) ___ ___
1 263-250 Steering wheel, original ___ ___
1 263-260 U-joint, steering ___ ___
1 263-288 Tie rod end pair ___ ___
1 263-110 Centerpiece S/W original ___ ___
4 263-200 Clip, steering wheel center piece ___ ___
1 263-250 Steering wheel, original ___ ___
1 324-780 Washer, secondary rack damper ___ ___
REAR AXLE:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 120-800 Oil Seal, differential pinion ___ _________________________
2 120-900 Oil seal, rear hub ___ ___
2 121-405 O-Ring, rear hub ___ ___
1 267-120 Locking pin, pinion axle ___ ___
2 267-130 Thrust washer, differential gear ___ ___
2 267-140 Thrust washer, differential pinion ___ ___
1 267-430 Nut, R/H (R/H thread) ___ ___
1 267-440 Nut, L/H (L/H thread) ___ ___
2 267-450 Washer, lk-tab, rear hub ___ ___
2 296-100 Gasket, rear hub ___ ___
1 296-200 Gasket, Differential housing ___ ___
1 520-500 Speedi-Sleeve for pinion ___ ___
2 520-520 Speedi-Sleeve for hub ___ ___
Chicago Rawhide 99193 - Federal Mogul 99193
REAR SUSPENSION:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 267-510 Silentbloc Bushing ___ _________________________
4 267-550 U-bolt ___ ___
2 267-610 Check strap ___ ___
2 267-650 Bump rubber ___ ___
1 281-598 Pad set, rubber ___ ___
1 282-855 Bushing set, shackle pins (8 pcs) urethane ___ ___
DRIVE SHAFT:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 268-060 U-joint ___ _________________________
1 268-035 Dust cap with rubber seal ___ ___
BRAKES:
QTY PART-NO. DESCRIPTION Status Thank You to:
- ------- Controls:
1 180-020 Gasket, master cyl end plate ___ _________________________
1 180-270 Gasket, master cyl top ___ ___
2 180-300 Fork, pushrod to pedal, M/C ___ ___
1 180-450 Washer, master cyl cap ___ ___
1 180-970 Repair kit, master cyl _R_ Kurt Nagle
1 321-648 Bolt & nut, pedals ___ ___
2 325-150 Clevis pin, master cyl ___ ___
2 329-350 Spring, pedal return, clutch & brake ___ ___
2 330-180 Bushing, pedals ___ ___
- ------- Rear:
1 180-470 Repair kit, rear wheel cyl's ___ ___
2 180-630 Rear wheel cyl, less boot ___ ___
1 180-830 Hose, 1-rear (or 180-831) ___ ___
2 180-950 Cup & boot ___ ___
1 324-730 Washer, small copper ___ ___
- ------- Front:
2 180-285 O-ring, fluid channel ___ ___
1 182-210 Pad set ___ ___
2 180-890 Hose, 1600 front (or 180-891)
2 180-980 Rebuild kit, front clalipers ___ ___
2 324-720 Washer, large copper ___ ___
2 324-730 Washer, small copper ___ ___
- ------- Handbrake:
1 181-500 Fulcrum, handbrake ___ _________________________
1 330-190 Bushing, fulcrum ___ ___
2 596-165 Clevis pin, cable, 5/16 x 17/32 reach ___ ___
FLOORS:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 280-000 Gasket, shift cover on tunnel ___ _________________________
1 326-480 Ring, shift boot top ___ ___
1 470-880 Seal, rear ramp ___ ___
ID PLATES:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 408-720 Chassis number ID plate ___ _________________________
1 408-800 Valve cover "MG" plate ___ ___
1 408-810 Valve cover patent number plate ___ ___
6 458-765 Rivet, valve cover plate ___ ___
BUMPERS:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 400-418 Packing set, overrider to bumper (does all 4) ___ _________________________
1 406-600 Lamp bracket, rear license plate ___ ___
1 451-285 Backing plate, rear license plate ___ ___
1 451-290 Main bracket, rear license plate ___ ___
1 451-720 Support, frt number plate ___ ___
1 470-980 Bracket L/H frt license plate ___ ___
1 470-990 Bracket R/H frt license plate ___ ___
FRONT BODY FITTINGS:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 165-100 Dash mirror, painted ___ _________________________
2 323-080 Screw, dash mirror mounting ___ ___
1 326-588 Speed nut set (24 pcs) ___ ___
2 363-195 Seal, felt (defroster box under dash) ___ ___
3 408-410 "1600" emblem ___ ___
1 472-560 Felt hood to radiator seal ___ ___
2 471-110 Ferrule, Bonnet & trunk release rods ___ ___
REAR BODY FITTINGS:
QTY PART-NO. DESCRIPTION Status Thank You to:
4 323-080 Screw, door buffer ___ _________________________
1 453-245 Packing, spare tire felt (pair) ___ ___
1 470-210 Seal, top of filler neck ___ ___
1 470-490 Tapping plate, door buffer ___ ___
1 470-698 "MG" emblem ___ ___
1 471-120 Channel, trunk release rod ___ ___
BODY RUBBER SET, 1600 ROADSTER: (281-728)
QTY PART-NO. DESCRIPTION Status Thank You to:
1 181-640 Rubber Blanking Plate ___ _________________________
1 249-738 Fender piping (for 4), orig. silver color ___ ___
2 280-120 Dust seal, headlamp ___ ___
1 280-300 Packing, fuel tank straps ___ ___
1 280-410 Plug, dipstick hole ___ ___
4 280-680 Door buffer ___ ___
6 280-690 Grommet, bumper mounting ___ ___
1 280-710 Pedal Excluder ___ ___
1 280-714 Trunk seal ___ ___
2 280-740 Grommet, windshield post ___ ___
1 280-760 Gearshift Boot ___ ___
2 280-770 Pad, brake & clutch pedals ___ ___
1 280-780 Ferrule, filler pipe to body ___ ___
1 280-790 Pad, gas pedal ___ ___
2 280-960 Pad, tail lamp (1500 plinth) ___ ___
2 281-148 Pad Set, fuel pump mounting ___ ___
1 281-628 Hood Buffer set, 10 buffers ___ ___
1 281-848 Grommet set (52 pcs) ___ ___
1 282-720 Seal Filler neck on trunk floor ___ ___
1 470-120 Grille piping, original silver color ___ ___
2 473-110 Pad, battery bracket ___ ___
1 473-198 Pad set, battery base ___ ___
1 680-470 Seal, windshield to body ___ ___
BODY PANELS, OUTER:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 280-808 Seal set, splash plates ___ _________________________
1 325-268 Split rivet set, splash seals ___ ___
BODY PANELS, INNER:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 282-750 Seal, heater cover plate ___ _________________________
2 470-710 Fastener, battey cover ___ ___
2 470-720 Spring, battey cover fastener ___ ___
WINDSHIELD:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 280-155 Packing for WS ends (5" long) ___ _________________________
1 280-735 Glazing rubber ___ ___
1 323-958 Screw set, windshield frame (Clarke Spares) ___ ___
2 325-210 Drive rivets, Auster plate ___ ___
1 408-790 Auster windshield nameplate ___ ___
2 408-880 Tapping plate (Clarke Spares) ___ ___
1 470-770 Bracket, LH top (Clarke Spares) ___ ___
1 470-780 Bracket, RH top (Clarke Spares) ___ ___
2 470-790 Bracket, Bottom (Clarke Spares) ___ ___
2 472-070 Grab handle R/H _R_ Kurt Nagle
2 472-080 Grab handle L/H _R_ Kurt Nagle
2 472-090 Packing, grab handle to body ___ ___
1 472-450 Packing, windshield post (pair) ___ ___
DOORS:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 280-200 Grommet, door pockets ___ _________________________
4 470-510 Shim, door hinge ___ ___
1 470-520 Latch, RH door ___ ___
1 470-530 Latch, LH door ___ ___
2 470-540 Striker, door latch ___ ___
2 470-560 Cable, door release ___ ___
4 472-455 Shim, door striker ___ ___
IGNITION:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 146-310 Washer, brass, coil wire securing ___ _________________________
1 151-710 Rotor, Lucas (or 151-800) replacwment) ___ ___
1 151-720 Contact set, Lucas (or 153-900 replacement) _R_ Gordie's Garage
1 151-730 Condenser, Lucas (or 154-000 replacement) ___ ___
4 152-120 Spark plug, Champion N9Y, (Autolite 63 NAPA) ___ ___
4 152-400 Nut, coil wire securing ___ ___
1 153-600 Terminal Bush w/lead, screw connector ___ ___
1 163-605 Vacuum unit (1500-1600) ___ ___
1 163-620 Vacuum pipe ass'y (pre-bent) ___ ___
1 163-805 Cap, Lucas (or 163-800 replacement) ___ ___
x (171-628)Ignition wire set with clips ___ ___
1 171-550 Separator, ignition wire ___ ___
4 171-620 Clip, spark plug ___ ___
1 171-627 Ignition wire, 5 feet ___ ___
1 171-630 Wire label set 4-pc ___ ___
1 323-345 Screw, points set ___ ___
1 543-020 Coil, ignition, screw-in HT ___ ___
1 560-450 Terminal Bush w/lead, Lucar connector ___ ___
1 571-037 Wire end, push-in coil wire ___ ___
1 571-047 Boot, push-in coil wire ___ ___
WIPERS:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 145-290 Chrome bezel, wheelbox ___ _________________________
2 164-980 Wiper blade ___ ___
2 164-990 Wiper arm (LHD) ___ ___
3 280-755 Grommet, mounting ___ ___
2 282-820 Pad, wheelbox bezel ___ ___
2 311-065 Chrome nut, wheelbox ___ ___
1 420-515 Grommet (in grommet set?) ___ ___
1 554-035 Brush pair (carbon blocks) ___ ___
LAMPS:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 143-500 Front parking lamp ass'y, 1500 ___ _________________________
2 143-800 Tail lamp ass'y ___ ___
1 144-200 License plate lamp, reproduction ___ ___
1 159-140 Plinth, L/H 1500 ___ ___
1 159-150 Plinth, R/H 1500 ___ ___
ELECTRICAL:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 140-400 Relay, turn signals 1500 ___ _________________________
1 140-500 Switch, headlights ___ ___
1 140-900 Switch, headlight dipper ___ ___
1 141-700 Switch, stoplight hydraulic ___ ___
1 141-750 Flasher unit ___ ___
1 142-000 Regulator, screw connectors ___ ___
1 142-400 Lamp, turn indicator ___ ___
1 144-100 Map light ass'y _R_ Kurt Nagle
1 145-600 Switch, horn push ___ ___
1 145-800 Switch, starter _R_ Kurt Nagle
1 146-000 Switch, panel lights _R_ Kurt Nagle
2 146-700 Fuse 35A ___ ___
2 146-800 Fuse 50A ___ ___
5 157-107 Wire tip, lamp ground connection ___ ___
1 161-500 Coupler, starter switch to cable ___ ___
10 161-600 Wire connector, double ___ ___
2 161-800 Strap, tail light cable ___ ___
1 161-850 Strap, rubber ___ ___
2 161-900 Boot, start switch rubber ___ ___
2 161-915 Bulb holder, map light ___ ___
20 162-000 Wire connector, single ___ ___
3 162-100 Switch, map light wiper fog ___ ___
30 162-200 Bullet connector ___ ___
1 162-400 Switch, turn signal ___ ___
1 162-500 Fuse box ___ ___
1 169-108 Switch, ignition _R_ Kurt
6 470-820 Clip, battery cable & harness ___ ___
2 470-830 Clip, tail lamp harness ___ ___
BATTERY:
QTY PART-NO. DESCRIPTION Status Thank You to:
2 473-180 Bracket, battery hold down ___ _________________________
1 473-188 Bolt set, battery (4 pcs) ___ ___
DASH:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 150-888 Dash knob set (8 pcs) ___ _________________________
1 233-740 Dash support bracket R/H ___ ___
1 233-750 Dash support bracket L/H ___ ___
1 233-750 Screen, speaker ___ ___
1 233-760 Blanking plate, speaker ___ ___
4ft 249-500 Dash piping, black ___ ___
2 280-870 Ring, rubber small 2" ___ ___
2 280-890 Ring, rubber large 4" ___ ___
1 281-920 Clip set, temp sending tube ___ ___
1 324-745 Washer, behind t/s jewel ___ ___
1 331-110 Cable, speedometer LHD ___ ___
1 331-120 Cable, tachometer LHD ___ ___
1 361-045 Glass lense oil/water & fuel gauge ___ ___
1 376-060 Oil line, flexible ___ ___
1 435-515 Washer, leather, oil tube to gauge ___ ___
1 435-530 Fitting, oil tube to flex line ___ ___
1 435-543 Tube, oil gauge to fitting ___ ___
1 472-078 Radio blanking plate set ___ ___
COCKPIT FITTINGS:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 150-888 Dash knob set (8 pcs) ___ _________________________
2 310-390 Nut, side curtain socket ___ ___
1 321-810 Hardware kit for cockpit rails ___ ___
1 321-958 Hardware kit 132pcs screws for interior ___ ___
6 323-115 Screw, side curtain plate ___ ___
2 324-425 Washer, side curtain socket ___ ___
2 405-150 Nut, side curtain 1600 ___ ___
2 405-300 Plate, side curtain ___ ___
1 453-255 Door top rail L/H wood ___ ___
1 453-260 Door top rail R/H wood ___ ___
1 453-265 Rear cockpit rail, wood ___ ___
1 453-718 Front Rail, uncovered w/ rubber & hardware ___ ___
2 470-570 Socket, side curtain ___ ___
1 472-128 Door seal finisher set, chrome ___ ___
1 472-170 Door corner rail L/H aluminum ___ ___
1 472-180 Door corner rail R/H aluminum ___ ___
1 472-460 Rear corner rail L/H aluminum ___ ___
1 472-470 Rear corner rail R/H aluminum ___ ___
BOOKS, TOOLS, ACCESSORIES:
QTY PART-NO. DESCRIPTION Status Thank You to:
1 210-410 MGA workshop manual ___ _________________________
1 - Haynes MGA repair manual _R_ Kurt Nagle
1 210-830 MGA 1600 driver's handbook ___ ___
1 211-000 MGA Special tuning manual ___ ___
1 211-386 "Original MGA", Anders Ditlev Clausager ___ ___
1 211-430 Haynes Weber carburetor manual ___ ___
1 212-236 "MGA The Complete Story", David Styles ___ ___
1 212-265 "MGA Restoration Guide", Malcom Green ___ ___
1 212-280 Brooklands Gold Portfolio, MGA ___ ___
1 212-960 "MGA: A History and Restoration Guide" ___ ___
1 384-905 Socket, rear hub nut 1-61/64" ___ ___
1 386-710 Oil gun (for steering rack) ___ ___
1 387-250 Clutch alignment tool, 10-spline ___ ___
1 990-035 Lucas Fault Diagnosis Manual ___ ___
1 ------- Moss Motors MGA parts ___ ___
1 ------- Victoria British MGA parts ___ ___
One more page - What to do with money.
|
MGA 1500 belonging to
