The MGA With An Attitude
RUBBER BUFFERS Locations For MGA bonnet -- BD-128

On 8/14/2015, Ed Johnson wrote:
"There are more holes than 10 for buffers. Looks like 6 go on the long sides. There are 6 holes on "top" and two corners; two holes are larger. Should 2 be put on corners and 2 near center of top"?

I just took couple of pictures for reference, then measured my car (1500) and made a drawing.

Body panels may vary +/-1/4-inch in this area. For instance, distance of the radiator support bracket to the first buffer is 1-1/4" on one side an 1-3/4" on the other side. If you locate these buffers within 1/4" of the specified dimensions no one can argue.

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2015 Barney Gaylord -- Copyright and reprint information