The MGA With An Attitude Slide:  9 of 34
Australian Delivered CKD MGA - CKD-102A

General Production Information   
  • The bodies and chassis came as separate pieces and were assembled by electric welding on jigs before being bolted together, to increase local content, so saving duty.

  • ‘All cars had wire wheels and the standard rear axle ratio (4.3). A heater was not normally fitted’.¹

  • ‘Australian MGA’s had locally produced bumpers and electrical looms’.²

    1 Source: Original MGA, Anders Ditlev Clausager, p. 85
    2 Source: Modern Motor


Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2006 Barney Gaylord -- Copyright and reprint information