The MGA With An Attitude
CONVERTIBLE TOP TECH -- TT-103-22 - (pg 22 of 30)

Now we're getting real close to finishing here. Remember the Lift-the-Dot lessons? Well there you are. Starting at the back, one fastener at a time, alternating sides, pull fabric tight, mark the spot, install the fastener, and go on to the next one. Actually, I stretched the fabric and marked the location of one peg on each side, then unhooked the top at front and back before installing those two fasteners, then hooked it all up again before marking the location for the next fasteners, and so on. So I unhooked it four times in the process, better careful than sorry.

Marking location for LTD fastener
Determining the location for the LTD fastener
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 1998 Barney Gaylord -- Copyright and reprint information