The MGA With An Attitude
SUBSTITUTE WHEELS for the MGA Twin Cam - TC-205E
(Gordon Keeble wheels)

Here we have a picture of the elusive Gordon-Keeble pin drive wheel, photo supplied by Edward Vandyk in the UK. (Click for larger image).
Gordon-Keeble wheel next to Twin Cam wheel
On left is the G.K. wheel 4-1/2x15 with 3/4" offset and 185-80-15 tire.
On right is the Twin Cam wheel 4x15 with 1" offset and 5.00L-15 tire.

With 1/4" less offset than the Twin Cam wheel, the G.K. rim will be 1/2" more outboard and same inboard, and very good fit for the MGA with standard fenders. The 185-80-15 tire, being significantly larger diameter than standard, will touch the front inner fender on full steering lock, but you wouldn't want tires that size (not that tall) on the MGA. The ideal tire size for the G.K. wheel on the MGA would be 185-70-15. This is a nice meaty looking tire without being grossly overweight, and is within 1% of the original tire diameter for MGA. 4-1/2" rim is a bit narrow for the 185 tires, but it works okay.
Gordon-Keeble car
In case you may be thinking about procuring a set of these wheels, only 99 Gordon-Keeble cars were built, and I don't suppose there were ever very many spare parts.

Also these wheels came in two sizes 4.5J and 5J with a production change some time before car 90 (out of 99 or 100 cars produced). Talk about rare!

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2013 Barney Gaylord -- Copyright and reprint information