The MGA With An Attitude
Cylinder Head GASKET for Twin Cam - TC-319

On 9/30/2011, Diethelm Zeiträg wrote:
"I need a new cylinderhead gasket, because I have a bigger bore. I found a company in Germany that makes gaskets, how you need it, bigger bore or what else. One type is from the material "Motorit", that means, in the middle it is steel, "Spiessblech", and with a fiberglass/graphite compound, and if you want copper on top or both sides (+0.2 mm each side). The thickness are from 1.0 mm, 1.2 mm, 1.5mm, 1.8mm, 2.0mm, good for 400°C. It is about 180.00 €, (10 pieces minus 10%). The other is Material from Reins, called "ex-treme+", good for 900°C. It is a keramik fiber with "Spiessblech" in the middle. The binder is "Glimmer". If you want,copper or steel on top or both sides (+0.2 mm one side). Cost about 250.00€ for one, for 10 minus 10%.

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2011 Barney Gaylord -- Copyright and reprint information