The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 2H
PART NO.  SPL.PAGE  DESCRIPTION                                                           
2H326     15.A.3    Key -crankshaft gear and pulley                       (#605 Woodruff)
2H326     sup.4     Key -gear -(crankshaft, engine unit, sup)             (#605 Woodruff)
2H326     sup.4     Key -pulley -(crankshaft, engine unit, sup)           (#605 Woodruff)
2H326     16.A.4    Key -pulley -(crankshaft, engine unit, 1600)          (#605 Woodruff)
2H326     16.A.4    Key -crankshaft gear and pulley -(engine unit, 1600)  (#605 Woodruff)
2H326     16.A.25   Key -crankshaft gear and pulley -(engine unit, 1622)  (#605 Woodruff)
2H326     TC.A.7    Key for gear -(crankshaft, engine, Twin Cam)          (#605 Woodruff)
2H326     TC.A.7    Key for pulley -(crankshaft, engine, Twin Cam)        (#605 Woodruff)
2H1080    16.D.3    Gasket -tank attachment (cork) -(sender unit, fuel tank, 1600)
2H1082    TC.D.3    Gasket -tank attachment (cork) -(sender unit, fuel tank, Twin Cam)-
    corrrection was ACB5468
2H2617    15.N.7    Connector -(3 for fog lights, optional)
2H2617    16.N.9    Connector (3) -(fog lamps optional, road lamps, 1600 and 1600-MK-II)
2H2617    16.N.14   Connector -snap -2-way (3) -(cables and connections, 1600 and
    1600-MK-II)
2H2617    16.N.14   Connector -snap -2-way (3) -(tail lamp harness, cables and
    connections, 1600 and 1600-MK-II)
2H2617    TC.N.9    Connector (3) -(snap -2-way, fog lamp, road lamps, electrical, Twin
    Cam) -optional
2H2646    16.S.1    Spanner -adjustable -(tool kit, 1600 and 1600-MK-II) -Fin.(C)93547-
    was ACH5283
2H2646    TC.S.1    Spanner -adjustable -(tool kit, Twin Cam) -cor. was ACG5283
2H2704    16.N.14   Plug -snap connector (A/R) -(cables and connections, 1600 and
    1600-MK-II)
2H2704    16.N.14   Plug -snap connector (A/R) -(chassis harness, cables and connections,
    1600 and 1600-MK-II)
2H2704    16.N.14   Plug -snap connector (A/R) -(panel harness, cables and connections,
    1600 and 1600-MK-II)
2H2704    16.N.14   Plug -snap connector (A/R) -(tail lamp harness, cables and
    connections, 1600 and 1600-MK-II)
2H3271    TC.B.2    Clip -(ign.ctrl.pipe, vac.control, ignition, Twin Cam) Fin.(E)2222-
    no longer required see service memorandum MG/301
2H3383    15.O.1    Push -horn -(switches, 1500)
2H3383    16.R.42   Horn-push -(facia panel, 1600 and 1600-MK-II)
2H3383    TC.R.53   Horn-push -(facia panel, Twin Cam)
2H3383    TC.N.10   Push horn -(flasher-horn controls, electrical, Twin Cam)
2H3406    16.N.14   Connector -snap -single (5) -(cables and connections, 1600 and
    1600-MK-II)
2H3406    16.N.14   Connector -snap -single (2) -(panel harness, cables and connections,
    1600 and 1600-MK-II)
2H3406    16.N.14   Connector -snap -single (2) -(tail lamp harness, cables and
    connections, 1600 and 1600-MK-II)
2H3420    TC.A.16   Clip for hose -water pump end (2) -(water.pipes, Twin Cam)
2H3705    TC.C.2    Clip for hose (2) -(tank to thermostat housing, cooling system,
    Twin Cam) -changed to 8G632
2H4185    16.N.3    Lock and key -ignition switch -(switches, 1600 and 1600-MK-II)-
    changed to 24G1345
2H4243    15.B.2    Sleeve -identity (No. 1) -(HT cables, ignition, 1500)
2H4243    16.B.3    Sleeve -identity (No. 1) -(HT cables, ignition, 1600)
2H4243    TC.B.2    Sleeve -HT cable identity (No. 1) -(ignition, Twin Cam)
2H4244    15.B.2    Sleeve -identity (No. 2) -(HT cables, ignition, 1500)
2H4244    16.B.3    Sleeve -identity (No. 2) -(HT cables, ignition, 1600)
2H4244    TC.B.2    Sleeve -HT cable identity (No. 2) -(ignition, Twin Cam)
2H4245    15.B.2    Sleeve -identity (No. 3) -(HT cables, ignition, 1500)
2H4245    16.B.3    Sleeve -identity (No. 3) -(HT cables, ignition, 1600)
2H4245    TC.B.2    Sleeve -HT cable identity (No. 3) -(ignition, Twin Cam)
2H4246    15.B.2    Sleeve -identity (No. 4) -(HT cables, ignition, 1500)
2H4246    16.B.3    Sleeve -identity (No. 4) -(HT cables, ignition, 1600)
2H4246    TC.B.2    Sleeve -HT cable identity (No. 4) -(ignition, Twin Cam)
2H4642    16.A.6    Terminal -sparking plug -(ignition, 1600)
2H4685    TC.A.13   Plug for sump -drain -(sump, engine, Twin Cam)
2H4732    15.O.1    Bulb (flasher warning light, dash, 1500)
2H4732    15.O.3    Bulb for panel and warning lights (7) -(dash, 1500)
2H4732    TC.N.10   Bulb -(flasher warning light, flasher-horn controls, electrical,
    Twin Cam) -changed to BFS987
2H4732    TC.O.1    Bulb Bulb -speedometer illumination -(instruments, Twin Cam) -changed
    to BFS987
2H4732    TC.O.1    Bulb Bulb -beam warning ight -(instruments, Twin Cam) -changed to
    BFS987
2H4732    TC.O.1    Bulb -revolution counter illumination -(instruments, Twin Cam)-
    changed to BFS987
2H4732    TC.O.1    Bulb -ignition warning light -(instruments, Twin Cam) -changed to
    BFS987
2H4732    TC.O.2    Bulb -fuel gauge illumination -(instruments, Twin Cam) -changed to
    BFS987
2H4810    16.E.4    Gasket -banjo -(clutch.op.cyl, clutch controls, ARDB model 1600)-
    Com.(C)91240 -was 17H4170
2H4817    15.N.6    Bulb (for number plate lamp) (1 for 1500 as original - 2 later)
2H4817    16.N.9    Bulb -sidelamp (2) -(road lamps, 1600 and 1600-MK-II) -changed to
    BFS989
2H4817    16.N.11   Bulb (2) -(tag lamp, number plate, Switzerland, road lamps, 1600 and
    1600-MK-II) Com.(C)92079 -changed to BFS989
2H4817    TC.N.7    Bulb -sidelamp (2) -(road lamps, electrical, Twin Cam) Com.(C)2193-
    changed to BFS989
2H4817    TC.N.7    Bulb (2) -(number plate lamp, road lamps, electrical, Twin Cam)-
    changed to BFS989
2H4905    15.A.3    Chain -timing -(engine unit, 1500)
2H4905    sup.4     Chain -timing -(engine unit, sup)
2H4905    16.A.4    Chain -timing -(engine unit, 1600)
2H4905    16.A.25   Chain -timing -(engine unit, 1622)
2H4932    TC.R.53   Bullb -map light -(facia panel, Twin Cam)
2H4992    16.N.14   Connector -snap -3-way (1) -(cables and connections, 1600 and
    1600-MK-II)
2H5003    16.A.31   Fastener -lift-the-dot -(stowage assembly -sidescreen, trimming, 1600
    and 1600-MK-II Tourer) -changed to LFS107
2H5003    16.R.37   Lift-the-dot fastener (6) -(hood8, 1600 & 1600-MK-II Tourer)-
    changed to LFS107
2H5003    16.R.38   Lift-the-dot fastener (12) -(tonneau cover, 1600 and 1600-MK-II
    Tourer) -changed to LFS107
2H5003    TC.R.49   Lift-the-dot fastener (20/12) -(tonneau cover, Tourer, Twin Cam)-
    Quantity reduced at (C)994
2H5004    16.A.31   Plate -clinch -(lift-the-dot, stowage assembly -sidescreen, trimming,
    1600 and 1600-MK-II Tourer) -changed to LFS100
2H5004    16.A.33   Clinch plate -fastener -(lift-the-dot, carpet-rear, trimming, 1600 and
    1600-MK-II Tourer) -changed to LFS100
2H5004    16.A.36   Clinch plate -fastener (16) -(lift-the-dot, trimming, 1600 and
    1600-MK-II Coupe) -changed to LFS100
2H5004    16.R.37   Lift-the-dot clinch plate (6) -(hood, 1600 and 1600-MK-II -changed
    to LFS100
2H5004    16.R.38   Lift-the-dot clinch plate (12) -(tonneau cover, 1600 and 1600-MK-II-
    changed to LFS100
2H5004    TC.R.41   Plate -clinch (16) -(Lift-the-dot, trimming, Tourer, Twin Cam) -was
    7H9963
2H5004    TC.R.46   Plate -clinch (16) -(Lift-the-dot, carpet, trimming, Coupe, Twin Cam)-
    was 7H9963
2H5004    TC.R.49   Lift-the-dot clinch plate (20/12) -(tonneau cover, Tourer, Twin Cam)-
    Quantity reduced at (C)994
2H8041    15.R.40   Grommet for control box blanking holes (2) -(sundries, 1500)
2H8041    15.R.40   Grommet for dipper switch blanking holes (3) -(sundries, 1500)
2H8041    16.R.43   Grommet -blanking control box holes (2) -(sundries, 1600 and
    1600-MK-II)
2H8041    16.R.43   Grommet -blanking dipper switch holes (3) -(sundries, 1600 and
    1600-MK-II)
2H8041    TC.R.54   Grommet -blanking dipper switch hole (LHD) -(sundries, Twin Cam)-
    Fin.(C)2280
HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2020, 2021 Barney Gaylord -- Copyright and reprint information