PART NO. SPL.PAGE DESCRIPTION
ACA4010 15.K.1 Plate (4) -(Welch plug for swivel link, front axle & suspension, 1500)
ACA4010 15.K.1 Welch plug (2) -(7/8" for gearbox, 1500) -(replaces 2K8158)
ACA4010 16.K.1 Plate (4) -(welch plug for swivel links -(front suspension, 1600 and
1600-MK-II std.model)
ACA4010 TC.K.1 Plate (2) -(welch plug for lower swivel links -(front suspension, Twin
Cam)
ACA4010 TC.K.1 Plate (2) -(welch plug for upper swivel links -(front suspension, Twin
Cam)
ACA5000 15.H.5 Distance piece for locating bolt (2) -(rear leaf spring, 1500)
ACA5000 16.H.10 Distance piece for locating bolt (2) -(rear leaf spring, 1600 and
1600-MK-II)
ACA5000 TC.H.5 Distance piece for locating bolt (2) -(rear spring, Twin Cam)
ACA5118 15.L.1 Clip assembly for seal (small) -(steering rack, 1500)
ACA5118 16.J.1 Clip -seal -small (2) -(rack assy, steering, 1600 and 1600-MK-II)-
changed to 3H2963
ACA5118 TC.J.1 Clip for seal (small) (2) -(rack assy, steering, Twin Cam)
ACA5127 15.D.3 Screw -tank unit to tank (6) -(fuel tank, 1500) -changed to ARG923
ACA5127 16.D.3 Screw -tank unit to tank (6) -(fuel tank, 1600) -changed to ARG923
ACA5127 TC.D.3 Screw -tank unit to tank (6) -(fuel tank, Twin Cam)
ACA5216 15.S.1 Tommy bar -(tool kit, 1500)
ACA5216 16.S.1 Tommy bar -(tool kit, 1600 and 1600-MK-II)
ACA5216 TC.S.1 Tommy bar -(tool kit, Twin Cam)
ACA5217 15.S.1 Wheelbrace -(tool kit, 1500)
ACA5217 16.S.1 Brace -wheel -(tool kit, 1600 and 1600-MK-II) Com.(C)93548
ACA5218 15.S.1 Screwdriver -(tool kit,1500)
ACA5218 16.S.1 Screwdriver -(tool kit, 1600 and 1600-MK-II) Fin.(C)93547
ACA5218 TC.S.1 Screwdriver -(tool kit, Twin Cam)
ACA5221 15.P.1 Cover for disc wheel(4) (see alternative ACA5308)
ACA5244 15.J.1 Pad for rack damper -(steering, 1500)
ACA5244 16.J.1 Pad for rack damper -(steering, 1600 and 1600-MK-II)
ACA5244 TC.J.1 Pad -rack damper -(steering, Twin Cam)
ACA5245 15.J.1 Housing for rack damper -(steering, 1500)
ACA5245 16.S.1 Spanner- tappet adjusting (ring type) -(tool kit, 1600 and
1600-MK-II) -Fin.(C)93547
ACA5245 TC.J.1 Housing -rack damper -(steering, Twin Cam)
ACA5246 15.J.1 Seat -ball (2) (for inboard tie rod joint, steering, 1500)
ACA5246 16.J.1 Seat -ball (2) (inboard tie rod joint, rack assy, steering, 1600 and
1600-MK-II)
ACA5246 TC.J.1 Seat -ball (2) (inboard tie rod joint, rack assy, steering, Twin Cam)
ACA5247 15.J.1 Lock washer for tie rod (2) -(steering, 1500)
ACA5247 16.J.1 Washer -lock -tie rod (2) -(rack assy, steering, 1600 and 1600-MK-II)
ACA5247 TC.J.1 Lock washer -tie rod (2) -(rack assy, steering, Twin Cam)
ACA5248 15.J.1 Spring for rack damper -(steering, 1500)
ACA5248 16.J.1 Spring for rack damper -(steering, 1600 and 1600-MK-II)
ACA5248 TC.J.1 Spring -rack damper -(steering, Twin Cam)
ACA5249 15.J.1 Shim for pad housing (A/R) (rack damper) -(steering, 1500)
ACA5249 16.J.1 Shim -pad housing .003" (.076mm) -(rack assy, steering, 1600 and
1600-MK-II)
ACA5249 TC.J.1 Shim -pad housing .003" (.076mm) -(rack assy, steering, Twin Cam)
ACA5283 15.J.1 Washer for rack damper secondary (1) -(steering, 1500)
ACA5283 16.J.1 Washer -housing -(secondary damper, rack assy, steering, 1600 and
1600-MK-II)
ACA5283 TC.J.1 Washer -rack damper secondary -(steering, Twin Cam)
ACA5284 15.J.1 Pad for rack damper secondary (1) -(steering, 1500)
ACA5284 TC.J.1 Pad -rack damper secondary damper -(steering, Twin Cam)
ACA5285 15.J.1 Housing for rack damper secondary (1) -(steering, 1500)
ACA5285 16.J.1 Housing -secondary damper -(rack assy, steering, 1600 and 1600-MK-II)
ACA5285 16.J.1 Housing -rack damper secondary -(steering, Twin Cam)
ACA5286 15.J.1 Spring for rack damper secondary (1) -(steering, 1500)
ACA5286 16.J.1 Spring -secondary damper pad -(steering, 1600 and 1600-MK-II)
ACA5286 TC.J.1 Spring -rack damper secondary -(steering, Twin Cam)
ACA5289 16.A3.19 Tee barrel -(cable, accelerator, engine controls, 1622) -replaces
earlier part AHH5626 Com (C)24594
ACA5290 15.D.7 Clips for air pipe (2) -(hose to air filter, air cleaner, 1500)
ACA5290 16.D.7 Clip -pipe (2) -(hose to air filter, air cleaners, 1600)
ACA5300 15.R.9 Grommet for dipstick hole in gearbox cover -(tunnel, body, 1600)
ACA5300 16.R.9 Grommet -dipstick hole -(in gearbox cover, floor, 1600 and 1600-MK-II)
ACA5300 TC.R.8 Grommet -dipstick -(in gearbox cover, flooring, Coupe, Twin Cam)
ACA5301 15.J.1 Shim for ball housing (.003") (A/R) (for inboard tie rod joint,
steering, 1500)
ACA5301 16.J.1 Shim for ball housing .003" (.076mm) (A/R) (for inboard tie rod joint,
steering, 1600 and 1600-MK-II)
ACA5301 TC.J.1 Shim -ball housing .003" (.076mm) (A/R) (for inboard tie rod joint,
steering, Twin Cam)
ACA5302 15.J.1 Shim for ball housing .005" (A/R) (for inboard tie rod joint, steering,
1500)
ACA5302 16.J.1 Shim for ball housing .005" (.127mm) (A/R) (for inboard tie rod joint,
steering, 1600 and 1600-MK-II)
ACA5302 TC.J.1 Shim -ball housing .005" (.127mm) (A/R) (for inboard tie rod joint,
steering, Twin Cam)
ACA5304 15.J.1 Housing -female ball (2) (for inboard tie rod joint, steering, 1500)
ACA5304 16.J.1 Housing -female ball (2) (inboard tie rod joint, rack assy, steering,
1600 and 1600-MK-II)
ACA5304 TC.J.1 Housing -female ball (2) (inboard tie rod joint, rack assy, steering,
Twin Cam)
ACA5308 15.P.1 Cover for disc wheel (4) (see alternative ACA5221) -(wheels, 1500)
ACA5308 16.P.1 Plug -road wheel (rubber) (4) (std.model 1600 and 1600-MK-II)
ACA5321 16.A3.18 Pad -pedal (rubber) (throttle pedal) -(engine controls, 1622)
ACA5321 TC.A.24 Pad -pedal (rubber) (throttle pedal) -(engine controls, Twin Cam)
ACA5374 15.R.9 Washer for screw -cup (2) -(blanking accelerator adjusting holes,
body, 1500)
ACA5374 16.R.9 Washer -cup -screw (2) -(blanking accelerator adjusting holes in
toeboard, RHD, floor, 1600 and 1600-MK-II)
ACA5374 16.R.9 Washer -screw (countersunk) (6) -(floor, 1600 and 1600-MK-II)
ACA5374 TC.R.8 Washer for screw (cup) (6) -(flooring, Coupe, Twin Cam)
ACA5374 TC.R.8 Washer for screw (cup) (7) -(toeboard L/H, flooring, Coupe, Twin Cam)
ACA5374 TC.R.8 Washer for screw (cup) RHD (2) -(blanking accelertor adj.stop holes,
flooring, Coupe, Twin Cam)
ACA5374 TC.R.8 Washer for screw (cup) (16) -(fixing front floorboard, flooring,
Coupe, Twin Cam)
ACA5374 TC.R.8 Washer for screw (cup) (25) -(fixing rear floorboard, flooring, Coupe,
Twin Cam)
ACA5374 TC.R.8 Washer for screw (cup) (12) -(fixing rear ramp, flooring, Coupe, Twin
Cam)
ACA5374 TC.R.8 Washer for screw (cup) (2) -(gearbox cover to toeboard plate,
flooring, Coupe, Twin Cam)
ACA6004 15.J.2 Ring for boot clip (2) (-tie rod end, steering, 1500)
ACA6004 16.J.2 Ring -boot (2) -(tie rod end, steering, 1600 and 1600-MK-II)
ACA6004 TC.J.1 Ring -boot clip (2) -(tie rod end, steering, Twin Cam) -changed to
7H3763
ACA6030 15.J.1 Clip assembly for seal (large)(2) -(rack assy, steering, 1500)
ACA6030 16.J.1 Clip -seal -large (2) -(rack assy, steering, 1600 and 16000-MK-II)-
changed to BMK924
ACA6030 TC.J.1 Clip for seal (large) (2) -(rack assy, steering, Twin Cam)
ACA6031 15.J.1 Housing -male ball (2) (for inboard tie rod joint, steering, 1500)
ACA6031 16.J.1 Housing -male ball (2) (inboard tie rod joint, rack assy, steering,
1600 and 1600-MK-II)
ACA6031 TC.J.1 Housing -male ball (2) (inboard tie rod joint, rack assy, steering,
Twin Cam)
ACA9878 16.M.5 Pipe- 4-way piece to front wheel cylinder -R/H -(hyd.pipes +fittings,
std.model 1600 and 1600-MK-II) -was AHH5956
|
