PART NO.  SPL.PAGE  DESCRIPTION                                                           
ACB5255   15.K.3    Bolt -pivot to member (8) -(wishbone, front suspension, 1500)
ACB5255   16.K.4    Bolt -pivot to member (8) -(wishbone, front suspension, 1600 and
    1600-MK-II)
ACB5255   TC.K.3    Bolt -pivot to member (8) -(wishbone, front suspension, Twin Cam)
ACB5468   15.D.3    Gasket cork -tank attachment -(sender unit, fuel tank, 1500)
ACB5468   TC.D.3    Gasket -tank attachment (cork) -(sender unit, fuel tank, Twin Cam)-
    corrrection changed to 2H1082
ACB8474   15.N.3    Grommet for bulkhead -dipper switch cable
ACB8474   15.O.2    Grommet -cable through dash (speedometer)
ACB8474   15.O.2    Grommet -cable through dash (revolution counter)
ACB8474   16.N.3    Grommet -dip switch cable through bulkhead -(switches, 1600 and
    1600-MK-II)
ACB8474   16.O.1    Grommet -cable through dash -(speedo,instruments, 1600 and 1600-MK-II)
ACB8474   16.O.1    Grommet -cable through dash -(revolution counter,instruments, 1600 and
    1600-MK-II)
ACB8474   TC.O.1    Grommet -cable -through dash -(speedometer cable, instruments,
    Twin Cam)
ACB8474   TC.O.1    Grommet -cable -through dash -(revolution counter -(instruments,
    Twin Cam)
ACB8701   16.M.5    Pipe- 4-way piece to rear hose -(hyd.pipes +fittings, std.model 1600
    and 1600-MK-II) -was AHH5281
ACB8715   15.M.4    Clevis pin -(2 hand brake cable output ends)
ACB8715   16.D.7    Pin -clevis (2) -(cable output ends, handbrake, ARDB model 1600 and
    1600-MK-II) Com.(C)91240
ACB8715   TC.M.4    Clevis pin (2) -(cable ends, handbrake, Twin Cam)
ACB9425   16.J.4    Lock assembly with ignition switch -(adj.steering column, steering,
    1600 and 1600-MK-II) -when steering lock is fitted
ACB9427   16.J.4    Bolt -shear (2) -(adj.steering column, steering, 1600 & 1600-MK-II)-
    when steering lock is fitted
ACB9428   16.J.4    Screw -location -(adj.steering column, steering, 1600 & 1600-MK-II)-
    when steering lock is fitted