PART NO. SPL.PAGE DESCRIPTION
FNZ103 15.A.19 Nut for guide screw(2) -(guide/toeboard plate, accel, engine controls)
FNZ103 15.A.19 Nut for cable to clamp -(accel.cable, engine controls)
FNZ103 15.A.20 Nut for choke abutment -(accelerator controls, 1500)
FNZ103 15.C.1 Nut for grille studs (4) -(case+grlle assembly, coooling system, 1500)
FNZ103 15.D.7 Nut for hose clip screw -(air intake hose, 1500)
FNZ103 15.M.5 Nut for clip screw -(at bottom of battery carrier)
FNZ103 15.M.5 Nut for 3-way pice to clip screw -(brake cable clip to 3-way bracket)
FNZ103 15.N.3 Nut for screw (dipper switch bracket to bulkhead) (4)
FNZ103 15.N.3 Nut for screw (dipper switch cable to bracket) (1)
FNZ103 15.N.4 Nut for screw (2) (control box to dash)
FNZ103 15.N.4 Nut for screw (2) (fuse box to dash)
FNZ103 15.N.4 Nut for screw (2) (headlamp flasher relay fixing)
FNZ103 15.N.5 Nut for screw -headlamp to wing (8)
FNZ103 15.N.7 Nut for screw -(2 for fog relay to bulkhead, N. America, optional) -
Com.(C)55633
FNZ103 15.N.9 Nut for lower bracket to bulkhead (2) (wiper motor)
FNZ103 15.N.10 Nut for main harness clip screw (2)
FNZ103 15.N.10 Nut for clip screw (3 for headlamp cable to front panel)
FNZ103 15.O.1 Nut for speaker grille blanking plate to facia panel (3)
FNZ103 15.O.1 Nut for map lamp to facia screw (2)
FNZ103 15.O.1 Nut for pipe clip screw (3 for oil and thermometer pipes)
FNZ103 15.Q.1 Nut for clip screw (2 for tail lamp harness to side-member)
FNZ103 15.Q.1 Nut for clip to clip bracket on frame (6 for side harness and cable)
FNZ103 15.R.1 Nut for screw (2) (rear bulkhead panel, tonn.ass'y, body ass'y 1500
Tourer)
FNZ103 15.R.2 Nut for bolt (10) (sill finisher, body ass'y 1500 Tourer) Com.(C)19949
FNZ103 15.R.2 Nut for bolt -(sill finisher, body shell, 1500)
FNZ103 15.R.4 Nut for screw (fixing splasher to front wing) (2 bottom) (body 1500
Tourer)
FNZ103 15.R.5 Nut for screw (2) (rear bulkhead panel, tonn.ass'y, body ass'y 1500
Coupe)
FNZ103 15.R.6 Nut for bolt (10) -(fixing sill finisher, body shell, 1500 Coupe)
FNZ103 15.R.10 Nut for boot lid hinge screw (2) -(fixing boot lid hinges) -(boot)
FNZ103 15.R.10 Nut for striking plate screw (2) -(plate to bracket) -(boot)
FNZ103 15.R.10 Nut for lock to rear body (2) -(fixing lock to body) -(boot)
FNZ103 15.R.14 Nut for door lock cable (2) -(door fittings, 1500 Tourer)
FNZ103 15.R.17 Nut for bonnet hinge screw (2) -(bonnet lid fittings)
FNZ103 15.R.31 Nut for dash trim roll bolt (6) -(trimming, 1500 Tourer)
FNZ103 15.R.31 Nut for trim roll to body (15) -(trimming, 1500 Tourer)
FNZ103 15.R.36 Nut for claw head bolt (6) -(fixing front trim roll, trimming, 1500
Coupe)
FNZ103 15.R.42 Nut for clip screw (2) -(4" hose/duct, heater, optional, 1500)
FNZ103 15.R.43 Nut (2) -(for screw for large air hose clip -(cold air kit,
optional, 1500)
FNZ103 16.A.35 Nut (2) -(clip, oil cooler pipes, engine unit 1622)
FNZ103 16.A3.19 Nut -screw (2) -(guide to toeboard plate, accel.cable, 1622)
FNZ103 16.C.1 Nut - badge -(grille assy, 1600)
FNZ103 16.C.1 Nut - stud (4) -(grille assembly, 1600)
FNZ103 16.C.2 Nut - screw -(air intake hose, 1600)
FNZ103 16.M.8 Nut - screw -(clip to battery carrier and main pipe clip, handbrake,
1600 and 1600-MK-II)
FNZ103 16.M.8 Nut - screw -(clip, 3-way piece, handbrake, 1600 and 1600-MK-II)
FNZ103 16.N.3 Nut - screw (2) -(solenoid, switches, 1600-MK-II) -for use when
steering lock is fitted
FNZ103 16.N.3 Nut - screw -(dipper, switches, 1600-MK-II)
FNZ103 16.N.4 Nut - screw (2) -(control box to dash, switches, 1600 and 1600-MK-II)
FNZ103 16.N.4 Nut - screw (2) -(fixing relay, switches, 1600-MK-II)
FNZ103 16.N.8 Nut - screw (8) -(headlamp to wing, headlamp N. America, road lamps,
1600 and 1600-MK-II)
FNZ103 16.N.9 Nut -screw (2) -(relay to bulkhead, fog lamp optional, road lamps,
1600 and 1600-MK-II) -for use with twin fog lamps
FNZ103 16.N.11 Nut -lamp to plinth (6) -(stop/tail, road lamps, 1600-MK-II)
Com.(C)100352
FNZ103 16.N.13 Nut -lower bracket to bulkhead (2) -(wiper motor, 1600 and 1600-MK-II)
FNZ103 16.N.14 Nut -screw (2) -(clip to bulkhead, cables and connections, 1600 and
1600-MK-II)
FNZ103 16.N.15 Nut -screw (2) -(clip to side member, tail lamp harness, cables and
connections, 1600 and 1600-MK-II)
FNZ103 16.N.15 Nut -screw (6) -(battery cable and harness, cables and connections,
1600 and 1600-MK-II)
FNZ103 16.O.1 Nut -screw (3) -(oil and thermometer pipe clip, instruments, 1600 and
1600-MK-II)
FNZ103 16.R.1 Nut -screw (2) -(fixing rear bulkhead panel, tonneau assy, body shell,
1600 and 1600-MK-II Tourer) Com.(C)78249 -was AFH1663
FNZ103 16.R.2 Nut -bolt (10) -(fixing sill finisher, body shell, 1600 and 1600-MK-II
Tourer)
FNZ103 16.R.3 Nut -screw (2) -(fixing front splash plate, body shell, 1600 and
1600-MK-II Tourer)
FNZ103 16.R.5 Nut -screw (2) -(rear bulkhead panel, tonneau assy, body shell, 1600
and 1600-MK-II Coupe)
FNZ103 16.R.6 Nut -bolt (10) -(sill finisher special, body shell, 1600 & 1600-MK-II
Coupe)
FNZ103 16.R.7 Nut -screw (2) -(front splash plate, body shell, 1600 amp 1600-MK-II
Coupe)
FNZ103 16.R.10 Nut -screw (2) -(hinges, booot lid fittings, 1600 and 1600-MK-II)
FNZ103 16.R.10 Nut -screw (2) -(striking plate, boot lid fittings, 1600 and
1600-MK-II)
FNZ103 16.R.10 Nut -screw (2) -(lock assy, boot lid fittings, 1600 and 1600-MK-II)
FNZ103 16.R.14 Nut -door lock cable (2) -(door fittings, 1600 and 1600-MK-II Tourer)
FNZ103 16.R.18 Nut -screw (2) -(hinges, bonnet fittings, 1600 and 1600-MK-II)
FNZ103 16.R.31 Nut -bolt (6) -(fixing dash trim roll, trimming, 1600 and 1600-MK-II
Tourer)
FNZ103 16.R.35 Nut for bolt (6) -(fixing dash trim roll, trimming, 1600 and
1600-MK-II Coupe)
FNZ103 16.R.31 Nut -trim roll to body (15) -(trimming, 1600 and 1600-MK-II Tourer)
FNZ103 16.R.41 Nut blanking plate to panel (3) -(radio speaker, 1600 and 1600-MK-II)
FNZ103 16.R.42 Nut -screw (2) -(map light cover to facia, 1600 and 1600-MK-II
FNZ103 16.R.45 Nut -screw -(door assy, heater assy, heater, 1600 and 1600-MK-II)
FNZ103 16.R.46 Nut -screw (2) -(clips for 4" hoses, heater, 1600 and 1600-MK-II)
FNZ103 16.R.46 Nut (2) -(clips for 4" hoses, cold air kit, 1600 and 1600-MK-II)
FNZ103 TC.A.24 Nut for screw (2) -(guide, accel.cable at firewall, engine controls,
Twin Cam)
FNZ103 TC.A.25 Nut for abutment -(choke control, engine controls, Twin Cam)
FNZ103 TC.C.1 Nut for screw (2) -(relief valve to bracket, cooling system, Twin Cam)
Com.(C)652 also 575, 613, 623, 633, 648
FNZ103 TC.C.2 Nut for screw -(clip to body, header overflow, cooling system, Twin
Cam) Com.(C)652 also 575, 613, 623, 633, 648
FNZ103 TC.C.2 Nut for badge -(false nose, grille assembly, cooling system, Twin Cam)
FNZ103 TC.C.2 Nut for stud (4) -(grille assy, cooling system, Twin Cam)
FNZ103 TC.M.5 Nut for screw -(cable and main pipe clips to battery carrier,
handbrake, Twin Cam)
FNZ103 TC.M.5 Nut for screw -(cable to axle bracket, handbrake, Twin Cam)
FNZ103 TC.N.3 Nut for screw LHD (2) -(dipper switch bracket to bulkhead, switches,
electrical, Twin Cam) -Fin.(C)2280
FNZ103 TC.N.4 Nut for screw (2) -(fixing control box, switches, electrical, Twin
Cam)
FNZ103 TC.N.4 Nut for screw (2) -(fixing fuse box, switches, electrical, Twin
Cam)
FNZ103 TC.N.4 Nut for screw, N.American LHD (2) -(fixing relay, headlamp flasher,
switches, electrical, Twin Cam) -optional extra
FNZ103 TC.N.7 Nut for screw, (8) -(headlamp to wing, road lamps, electrical, Twin
Cam)
FNZ103 TC.N.9 Nut for screw, (2) -(relay to bulkhead, N.America LHD, fog
lamp, road lamps, electrical, Twin Cam) -optional, for use with twin fog lamps
FNZ103 TC.N.11 Nut -lower bracket to bulkhead (2) -(wiper motor, windscreen wiper,
electrical, Twin Cam)
FNZ103 TC.N.12 Nut for screw (2) -(clip, main harness to bulkhead, cables and
connections, electrical, Twin Cam)
FNZ103 TC.N.12 Nut for screw (3) -(clip, headlamp cable to font panel, cables and
connections, electrical, Twin Cam)
FNZ103 TC.N.12 Nut for screw (2) -(clip, tail lamp harness to side member, cables
and connections, electrical, Twin Cam)
FNZ103 TC.O.2 Nut for screw (2) -(oil and thermometer pipe clip, instruments, Twin
Cam)
FNZ103 TC.O.2 Nut for bolt (2) -(splash plate to front wing, body shell, Tourer,
Twin Cam)
FNZ103 TC.O.3 Nut for screw (2) -(rear bulkhead panel, tonneau assy, body shell,
Tourer, Twin Cam)
FNZ103 TC.O.2 Nut for bolt (10) -(sill finisher, body shell, Twin Cam)
FNZ103 TC.O.3 Nut for screw (2) -(rear bulkhed panel, tonneau assy, body shell,
Tourer, Twin Cam)
FNZ103 TC.R.5 Nut for screw (2) -(front spalsh plate to wing, body shell, Coupe,
Twin Cam)
FNZ103 TC.R.5 Nut for bolt (10) -(sill finisher, body shell, Coupe, Twin Cam)
FNZ103 TC.R.6 Nut for screw (2) -(rear bulkhed panel, tonneau assy, body shell,
Coupe, Twin Cam)
FNZ103 TS.R.9 Nut for screw (2) -(fixing lock, boot, Twin Cam)
FNZ103 TS.R.9 Nut for screw (2) -(fixing hinge, boot, Twin Cam)
FNZ103 TS.R.9 Nut for screw (2) -(striking plate, boot, Twin Cam)
FNZ103 TC.R.13 Nut -door lock cable (2) -(door fittings, Tourer, Twin Cam)
FNZ103 TC.R.17 Nut for screw (2) -(fixing hinge, bonnet fittings, Twin Cam)
FNZ103 TC.R.35 Nut for screw (12) -(bracket to tunnel, early Seat Belts, Twin Cam)
FNZ103 TC.R.35 Nut for screw (12) -(bracket to tunnel, late Seat Belts, Twin Cam)
FNZ103 TC.R.36 Nut for bolt (6) -(fixing dash trim roll, trimming, Tourer, Twin Cam)
FNZ103 TC.R.37 Nut for screw (6) -(fixing door trim roll, trimming, Tourer, Twin Cam)
FNZ103 TC.R.38 Nut for bolt (6) -(fixing rear trim roll (9) -5 back, 2 ea side,
trimming, Tourer, Twin Cam)
FNZ103 TC.R.53 Nut blanking plate to panel (3) -(radio speaker grille, facia panel,
Twin Cam)
FNZ103 TC.R.53 Nut for screw (2) -(map light cover, facia panel, Twin Cam)
FNZ103 TC.R.57 Nut for screw (3) -(heater, heat+vent equip, Twin Cam)
FNZ103 TC.R.57 Nut for screw (3) -(heater, heat+vent equip, Twin Cam)
FNZ104 15.A.18 Nut for screw (2) -intermediate mtg to frame -(exhaust system, 1500)
FNZ104 15.A.18 Nut for screw (2) -rear mounting to frame -(exhaust system, 1500)
FNZ104 15.A.18 Nut for rear mounting bolt -(exhaust system, 1500)
FNZ104 15.A.18 Nut for housing screw -(exhaust system, 1500)
FNZ104 15.A.19 Nut for screw -(dist tube, adj.stop, accel.pedal, engine controls)
FNZ104 15.A.20 Nut for clamp to cable -Accelerat controls
FNZ104 15.B.1 Nut for bracket and clamp -(coil mount, ignition, 1500)
FNZ104 15.D.2 Nut for bolt (2) -(pump mounting, fuel pump, 1500)
FNZ104 15.D.3 Nut for rear mounting (2) -(fuel tank, 1500)
FNZ104 15.K.3 Nut for screw (4) -(spigot to member, front suspension, 1500)
FNZ104 15.M.1 Nut for distance tube bolt -(pedal stop)
FNZ104 15.M.3 Nut for 4-way piece stud
FNZ104 15.M.4 Nut for bolt -(for 3-way piece to axle bracket) -
Com.(C)27989 (disc wheels), (C)28540 (wire wheels)
FNZ104 15.M.4 Nut for screw -compensating lever (parking brake)
FNZ104 15.N.8 Nut for screw -relay unit to dash (2)
FNZ104 15.N.8 Nut for screw -horn to bracket (R/H standard)
FNZ104 15.N.8 Nut for screw -horn to bracket (L/H optional)
FNZ104 15.N.9 Nut for upper bracket to lower bracket (wiper motor)
FNZ104 15.N.10 Nut for petrol pump to earth cable
FNZ104 15.N.10 Locknut to ramp screw clip (negative cable to starter switch)
FNZ104 15.O.2 Nut for speedometer clip R/H toeboard screw
FNZ104 15.R.2 Nut for screw -(16) (hinge, door, body ass'y 1500-T)
FNZ104 15.R.3 Nut for screw -(4) (rear forward splash plate to body 1500-T)
FNZ104 15.R.6 Nut for screw -(16) (fixing hinge, door, body ass'y 1500-C)
FNZ104 15.R.7 Nut for screw -plate to body -(4 at top of front s-plate)(body 1500
Coupe)
FNZ104 15.R.18 Nut for striker pin set screw (2) -(bonnet catch control)
FNZ104 15.R.19 Nut for plate to bracket screw (2) -(front number plate)
FNZ104 15.R.19 Nut for brackets to bumper screw (2) -(front number plate)
FNZ104 15.R.19 Nut for number-plate to bracket screw (2) -(rear number plate)
FNZ104 15.R.27 Nut for seat to runner (16) -(seat and seat fittings)
FNZ104 16.A3.17 Nut -screw (2) -(housing to intermediate mounting, exh.system 1622)
FNZ104 16.A3.17 Nut -screw (4) -mounting to frame -(rear, exhaust system 1622)
FNZ104 16.A3.17 Nut -bolt -mounting to frame -(rear mtg to tail pipe, exh.sys, 1622)
FNZ104 16.A3.18 Nut -screw -distance tube/adjustable stop (2) -(accel.control, 1622)
FNZ104 16.A3.19 Nut -cable to clamp -(accel.control, 1622)
FNZ104 16.A3.19 Nut -cable to clamp -(choke control, 1622)
FNZ104 16.B.2 Nut -screw (2) -(fixing coil to bracket, 1600 standard model)
FNZ104 16.B.2 Nut -screw -(fixing coil into bracket, 1600 all round disc brakes
model) -Com.(C)91240
FNZ104 16.D.2 Nut -bolt (2) -(fuel pump to frame, 1600)
FNZ104 16.D.3 Nut -bolt (2) -(rear mounting. fuel tank, 1600)
FNZ104 16.D.8 Nut for bolt (2) -(keep plate, pad, caliper assy, rear axle, ARDB
model 1600 and 1600-MK-II) -Com.(C)92104
FNZ104 16.K.4 Nut -screw (4) -(spigot to member, coil spring, front suspension, 1600
and 1600-MK-II)
FNZ104 16.M.2 Nut -bolt(2) -(distance tube, pedal stop, brake controls, ARDB model,
1600 and 1600-MK-II)
FNZ104 16.M.5 Nut -stud -(4-way, std.model 1600 and 1600-MK-II)
FNZ104 16.M.5 Nut -bolt -(3-way, std.model 1600 and 1600-MK-II)
FNZ104 16.M.6 Nut -stud -(5-way connection -(hyd.pipes +fittings, ARDB model 1600
and 1600-MK-II) Com.(C)91240
FNZ104 16.M.7 Nut -screw -(compensating lever, handbrake, 1600 and 1600-MK-II)
FNZ104 16.N.12 Nut -screw (2) -(horn to bracket, R/H low note, 1600 and 1600-MK-II)
FNZ104 16.N.12 Nut -screw (2) -(horn to bracket, L/H high note, 1600 and 1600-MK-II)
FNZ104 16.N.13 Nut -upper bracket to lower bracket -(wiper motor, 1600 and
1600-MK-II)
FNZ104 16.O.1 Nut fixing clip -(speedo cable to dash, instruments, 1600 and
1600-MK-II)
FNZ104 16.R.2 Nut -screw (16) -(door hinges, body shell, 1600 and 1600-MK-II)
FNZ104 16.R.3 Nut -screw (4) -(splash plate rear wing front, body shell 1600 and
1600-MK-II Tourer)
FNZ104 16.R.5 Nut -bracket (2) -(spare wheel, tonneau assy, body shell, 1600 and
1600-MK-II Coupe)
FNZ104 16.R.6 Nut -screw (16) -(door hinge, body shell, 1600 and 1600-MK-II Coupe)
FNZ104 16.R.8 Nut -screw (4) -(splash rear wing front, body shell 1600 and
1600-MK-II Coupe)
FNZ104 16.R.18 Nut -screw (2) -(striker bracket, bonnet fittings, 1600 & 1600-MK-II)
FNZ104 16.R.19 Nut -screw (2) -(number plate front, 1600 and 1600-MK-II)
FNZ104 16.R.19 Nut -screw (2) -(number plate rear, 1600 and 1600-MK-II)
FNZ104 16.R.26 Nut -screw (16) -(seat to runner, seats, 1600 and 1600-MK-II)
FNZ104 TC.A.9 Nut for bolt (2) -(adjuster to engine front plate, chain, camshaft,
engine, Twin Cam)
FNZ104 TC.A.16 Nut for screw -(bypass pipe clip, water.pipes, Twin Cam)
FNZ104 TC.A.23 Nut for screw (4) -(mtg.to.frame, intermediate and rear, exhaust
system, Twin Cam)
FNZ104 TC.A.23 Nut for screw -(housing to intermediate mouning (2) -(exhaust system,
Twin Cam)
FNZ104 TC.A.24 Nut for screw (2) -(fixing distance tube and adjustable stop,
accel.pedal, engine controls, Twin Cam)
FNZ104 TC.A.25 Nut cable to clamp -(accel.cable stop, engine controls, Twin Cam)
FNZ104 TC.B.2 Nut for setscrew (2) -(cable clamp, cyl.head, ignition, Twin Cam)-
Com.(E)556
FNZ104 TC.B.2 Nut for bolt -(fixing clip, HT lead L/H wing valance, ignition, Twin
Cam)
FNZ104 TC.C.2 Nut for screw -(bracket to body, relief valve, cooling system, Twin
Cam) Com.(E)652 also 575, 613, 623, 633, 648 -was ARH1022
FNZ104 TC.D.2 Nut for bolt (4) -(pump mounting, fuel system, Twin Cam)
FNZ104 TC.D.2 Nut for screw -(earth to pump frame bracket, fuel system, Twin Cam)
FNZ104 TC.D.3 Nut for bolt (2) -(rear mounting, fuel tank, Twin Cam)
FNZ104 TC.K.2 Nut for bolt (2) -(keep plate, caliper assy, front axle, Twin Cam)
FNZ104 TC.H.3 Nut for bolt (2) -(keep plate, caliper assy, rear axle, Twin Cam)
FNZ104 TC.K.3 Nut for bolt (4) -(spigot to cross member, coil springs, front
suspension, Twin Cam)
FNZ104 TC.M.1 Nut for rod (2) -(distance tube, pedal stop, brake controls, Twin Cam)
FNZ104 TC.M.4 Nut for screw -(compensating lever, handbrake, Twin Cam)
FNZ104 TC.N.10 Nut for screw (2) -(relay unit, flasher-horn controls, electrical,
Twin Cam) -Fin.(C)2192
FNZ104 TC.N.10 Nut for screw (2) -(horn to bracket, R/H front extension, low note,
flasher-horn controls, electrical, Twin Cam)
FNZ104 TC.N.10 Nut for screw (2) -(horn to bracket, L/H to front extension, high
note, flasher-horn controls, electrical, Twin Cam) -optional extra
FNZ104 TC.N.11 Nut upper bracket to lower bracket -(wiper motor, windscreen wiper,
electrical, Twin Cam)
FNZ104 TC.N.12 Nut for petrol pump to eartn cable -(cables and connections,
electrical, Twin Cam)
FNZ104 TC.N.12 Nut for bolt -(clip, coil to L/H wing valance, cables and
connections, electrical, Twin Cam)
FNZ104 TC.O.1 Nut fixing clip -(speedometer cable, instruments, Twin Cam)
FNZ104 TC.O.3 Nut for screw (16) -(door hinge, body shell, Tourer, Twin Cam)
FNZ104 TC.R.3 Nut for screw (4) -(rear wing front, body shell, Tourer, Twin Cam)
FNZ104 TC.R.6 Nut for screw (16) -(door hinge, body shell, Coupe, Twin Cam)
FNZ104 TC.R.6 Nut fixing bracket (2) -(spare wheel, tonneau assy, body shell,
Coupe, Twin Cam) Com.(C)2292
FNZ104 TC.R.7 Nut for screw (4) -(rear wing forward splash, body shell, Coupe, Twin
Cam)
FNZ104 TC.R.19 Nut for screw (2) -(number plates and fittings, Twin Cam)
FNZ104 TC.R.18 Nut for screw -(striker pin assy, bonnet fittings, Twin Cam)
FNZ104 TC.R.19 Nut for screw (2) -(plate to bracket, number plates and fittings,
Twin Cam)
FNZ104 TC.R.19 Nut for screw (2) -(bracket to bumper, number plates and fittings,
Twin Cam)
FNZ104 TC.R.19 Nut for screw (2) -(rear, number plates and fittings, Twin Cam)
FNZ104 TC.R.29 Nut for screw (16) -(seat slide to runner, seats, Twin Cam)
FNZ104 TC.R.57 Nut (2) -(heater, heat+vent equip, Twin Cam)
FNZ105 15.A.1 Nut for front cover studs (7) -(gearbox)
FNZ105 15.A.4 Nut for housing stud (tach drive)
FNZ105 15.A.6 Nut for stud (water outlet)
FNZ105 15.A.7 Nut for blanking plate stud (petrol pump to engine)
FNZ105 15.A.17 Nut -engine mounting to bracket (4) -(engine mounting)
FNZ105 15.A.17 Nut for screw (8) -(rubber to frame brackets, engine mounting)
FNZ105 15.A.18 Nut -bush to housing bolt -(intermediare hanger, exhaust system)
FNZ105 15.A.18 Nut for strap screw -(exhaust system)
FNZ105 15.A.19 Nut for fulcrum pin -(accel pedal, engine controls)
FNZ105 15.F.1 Nut for gearbox extension (2)
FNZ105 15.H.1 Nuts for differential carrier bolts (10)
FNZ105 15.H.5 Nut for locating bolt (rear leaf spring)
FNZ105 15.J.2 Nut for rack to bracket -rear bolt (2) -(steering, 1500)
FNZ105 15.J.3 Nut for clamp bolt (2) (steering column)
FNZ105 15.J.3 Nut for screw (2) (for steering seal and retainer to dash) -(1500)
FNZ105 15.J.3 Nut for screw (2) (blanking plate and seal to dash) -(steering, 1500)
FNZ105 15.K.3 Nut for screw (8) (spring pan to wishbone)
FNZ105 15.K.3 Nut for bolt -check rubber to member (4) -(front suspension, 1500)
FNZ105 15.K.4 Nut for screw (4) -(bush, roll bar to frame, 1500) -optional extra
FNZ105 15.M.1 Nut for screw -(2 pedal blanking cover)
FNZ105 15.M.1 Nut for screw -(4 master cylinder box to bulkhead)
FNZ105 15.M.1 Nut for box to braclet screw -(4 pedal box)
FNZ105 15.M.1 Nut for screw -(2 pedal support brackets L&R)
FNZ105 15.M.3 Nut for screw -(for 3-way piece at axle bracket)
FNZ105 15.M.4 Nut for scew -hand brake to gearbox cover (8)
FNZ105 15.M.4 Nut for bolt operating lever -(hand brake)
FNZ105 15.M.5 Abutment nut -(hand brake cable front)
FNZ105 15.N.7 Nut for screw -(2 for fog lamp bracket lower, optional)
FNZ105 15.N.8 Nut for screw -(flasher unit to dash)
FNZ105 15.N.8 Nut for screw -(horn bracket to R/H front extention (2 standard)
FNZ105 15.N.8 Nut for screw -(horn bracket to L/H front extention (2 optional)
FNZ105 15.N.10 Nut for harness clips to wing bolt (3)
FNZ105 15.N.10 Nut for earth cable screw
FNZ105 15.Q.1 Nut for bracket to front extension screw (6)
FNZ105 15.Q.2 Nut for body to front/rear frame brackets (5)
FNZ105 15.R.20 Nut for corner to centre bar bolt (2) -(front bumper)
FNZ105 sup.1 Nut -stud (2) -(fuel pump blank.plate, block assy, engine unit, sup)
FNZ105 sup.7 Nut -stud (3) -(water outlet elbow, engine unit, sup)
FNZ105 16.A.6 Nut -stud (3) -(water outlet elbow, engine unit, 1600)
FNZ105 16.A.7 Nut -stud -pipe to crankcase -(engine unit, 1600)
FNZ105 16.A.7 Nut -stud (2) -(tachometer drive, engine unit, 1600)
FNZ105 16.A.16 Nut for screw (8) -(mounting rubber to frame, engine unit, 1600)
FNZ105 16.A.23 Nut -bolt -(engine mtg bracket to plate R/H top, engine unit, 1622)
FNZ105 16.A.27 Nut -stud (3) -(water outlet elbow, engine unit, 1622)
FNZ105 16.A.28 Nut -stud -pipe to crankcase -(vent, engine unit, 1622)
FNZ105 16.A.28 Nut -stud (2) -(tachometer pinion housing, engine unit, 1622)
FNZ105 16.A3.17 Nut -bolt -(bush and housing to pipe, exhaust system, 1622)
FNZ105 16.A3.17 Nut -screw -(strap to front pipe,exhaust system 1622)
FNZ105 16.A3.18 Nut fulrum pin (RHD) -(accelerator pedal, 1622)
FNZ105 16.B.2 Nut -coil to dynamo bracket -(1600 all round disc brakes model)-
Com.(C)91240
FNZ105 16.F.1 Nut -front cover stud (7) -(GB assy, 1600 and 1600-MK-II)
FNZ105 16.F.1 Nut -stud -rear extension to casing (2) -(GB assy, 1600 & 1600-MK-II)
FNZ105 16.H.1 Nut -gear carrier to case (10) -(rear axle, 1600 & 1600-MK-II)
FNZ105 16.H.5 Nut -gear carrier to case (10) -(rear axle, ARDB model, 1600 and
1600-MK-II) -Com.(C)91240
FNZ105 16.H.10 Nut -bolt (2) -(center of spring, rear spring, 1600 & 1600-MK-II)
FNZ105 16.J.2 Nut -bolt (2) -(rack to bracket rear, steering, 1600 and 1600-MK-II)
FNZ105 16.J.3 Nut -screw (2) -(steering column, steering, 1600 and 1600-MK-II)
FNZ105 16.J.3 Screw -retainer to dash -(seal, steering, 1600 and 1600-MK-II)
FNZ105 16.J.3 Nut -screw (2) -(blanking plate to dash, steering, 1600 and
1600-MK-II)
FNZ105 16.J.4 Nut -screw -(column to upper bracket, steering, 1600 and 1600-MK-II)-
when steering lock is fitted
FNZ105 16.K.3 Nut -lockplate (4) -(hose, front brakes, 1600 & 1600-MK-II std.model)
FNZ105 16.K.4 Nut -screw (8) -(wishbone, front suspension, 1600 and 1600-MK-I
std.model)
FNZ105 16.K.4 Nut -bolt (4) -(check rubber to member, front suspension, 1600 and
1600-MK-I std.model)
FNZ105 16.K.5 Nut -screw (4) -(bush, anti-roll bar to frame, 1600 and 1600-MK-II
std.model) -optional extra
FNZ105 16.M.1 Nut -screw (2) -(blanking piece, brake controls, std.model, 1600 and
1600-MK-II)
FNZ105 16.M.1 Nut -screw (4) -(box to bulkhead, brake controls, std.model, 1600 and
1600-MK-II)
FNZ105 16.M.1 Nut for screw (4) -(box to bracket, brake controls, std.model, 1600
and 1600-MK-II)
FNZ105 16.M.1 Nut -screw (2) -(bracket to base plate, brake controls, std.model,
1600 and 1600-MK-II)
FNZ105 16.M.2 Nut -rod -(pedal stop, brake pedal, brake controls, ARDB model 1600
and 1600-MK-II) -Com.(C)91240
FNZ105 16.M.2 Nut -screw (2) -(box to bulkhead, brake controls, ARDB model 1600 and
1600-MK-II) Com.(C)91240
FNZ105 16.M.2 Nut -screw (2) -(fume excluder, and cover plate to cross bar (2)-
(brake controls, ARDB model 1600 and 1600-MK-II) Com.(C)91240
FNZ105 16.M.2 Nut -screw (6) -(box to bracket, brake controls, ARDB model 1600 and
1600-MK-II) Com.(C)91240
FNZ105 16.M.2 Nut -screw (2) -(blanking plate, brake controls, ARDB model 1600 and
1600-MK-II) Com.(C)91240
FNZ105 16.M.5 Nut -screw -(3-way piece to bracket, std,model, 1600 and 1600-MK-II)
FNZ105 16.M.6 Nut -screw -(3-way connection and cable clip to rear axle -(hyd.pipes
+fittings, ARDB model 1600 and 1600-MK-II) -Com.(C)91240
FNZ105 16.M.8 Nut -abutment -(cable, handbrake, 1600 and 1600-MK-II)
FNZ105 16.M.7 Nut -screw -(handbrake to gearbox cover (8) -(1600 and 1600-MK-II)
FNZ105 16.M.7 Nut -bolt -(operating lever, handbrake, 1600 and 1600-MK-II)
FNZ105 16.N.9 Nut -screw -(bracket to bumper blade (lower) (2) -(fog lamp optional,
road lamps, 1600 and 1600-MK-II)
FNZ105 16.N.11 Nut -stud (4) -(plinth to body, stop/tail, road lamps, 1600-MK-II)-
Com.(C)101352
FNZ105 16.N.12 Nut -screw (3) -(flasher to dash, 1600 and 1600-MK-II)
FNZ105 16.N.12 Nut -screw (2) -(horn bracket to R/H front extension, 1600 and
1600-MK-II)
FNZ105 16.N.12 Nut -screw (2) -(horn bracket to L/H front extension, 1600 and
1600-MK-II)
FNZ105 16.N.15 Nut -clip to wing bolt (3) -(cables and connections, 1600)
FNZ105 16.N.15 Nut -screw -(battery cable to earth, cables and connections, 1600
and 1600-MK-II)
FNZ105 16.Q.1 Nut -screw (6) -(bracket assembly to front extension, chassis frame,
1600 and 1600-MK-II)
FNZ105 16.R.19 Nut -screw (2) -(number plate -front, 1600 and 1600-MK-II)
FNZ105 16.R.20 Nut -bolt (2) -(corner bar to center bar , front bumper assy, 1600
and 1600-MK-II)
FNZ105 16.R.43 Nut -mirror fixing -(wing mirror, sundries, 1600 and 1600-MK-II) -was
57H5437
FNZ105 TC.A.1 Nut for stud (2) -(fuel pump port, cyl.block assy, engine, Twin Cam)
FNZ105 TC.A.1 Nut for stud (2) -(tach.drv, cyl.block assy, engine, Twin Cam)
FNZ105 TC.A.8 Nut for screw (4) -(damper bracket to engine front plate, chain,
camshaft, engine, Twin Cam)
FNZ105 TC.A.9 Nut for oil feed pipe pillar -(chain, camshaft, engine, Twin Cam)
FNZ105 TC.A.9 Nut for stud (3) -(stud for water pump, case front timing, camshaft,
Twin Cam)
FNZ105 TC.A.9 Nut for stud (3) -(distributor drive housing, case front timing,
camshaft, Twin Cam)
FNZ105 TC.A.10 Nut for screw (5) -(timing case to engine front plate, camshaft,
engine, Twin Cam)
FNZ105 TC.A.10 Nut for bolt -(timing case and thermostat housing to front plate,
camshaft, engine, Twin Cam)
FNZ105 TC.A.15 Nut for spindle -(water.pump, engine, Twin Cam)
FNZ105 TC.A.15 Nut for bolt -(pump to engine front plate, water.pump, engine, Twin
Cam)
FNZ105 TC.A.16 Nut for screw (2) -(thermostat housing to engine front plate,
water.pipes, Twin Cam)
FNZ105 TC.A.21 Nut for stud (8) -(inlet manifold, engine, Twin Cam)
FNZ105 TC.A.22 Nut mounting to bracket (4) -(engine mounting, Twin Cam)
FNZ105 TC.A.22 Nut for screw (8) -(mounting rubber to bracket, engine mounting, Twin
Cam)
FNZ105 TC.A.23 Nut for bolt -(intemediate mounting, exhaust system, Twin Cam)
FNZ105 TC.A.23 Nut for screw -(strap to front pipe, exhaust system, Twin Cam)
FNZ105 TC.A.23 Nut for screw -(clip, connector pipe, exhaust system, Twin Cam)
FNZ105 TC.A.24 Nut for fulcrum pin -(accel.pedal, RHD, engine controls, Twin Cam)
FNZ105 TC.D.2 Nut for stud (2) -(pump to bracket, fuel system, Twin Cam)
FNZ105 TC.F.1 Nut for front cover studs (7) -(gearbox assy, Twin Cam)
FNZ105 TC.F.1 Nut for extension studs (2) -(gearbox assy, Twin Cam)
FNZ105 TC.H.1 Nut -gear carrier to axle (10) -(rear axle, Twin Cam)
FNZ105 TC.H.5 Nut for locating bolt (2) -(rear spring, Twin Cam)
FNZ105 TC.J.2 Nut for bolt (2) -(rack to bracket rear, steering, Twin Cam)
FNZ105 TC.J.2 Nut for clamp bolt (2) -(steering column, steering, Twin Cam)
FNZ105 TC.J.3 Nut for screw (2) -(retainer to dash, at bulkhead, steering, Twin Cam)
FNZ105 TC.J.3 Nut for screw (2) -(blanking plate to dash, pass.side steering hole
in bulkhead, steering, Twin Cam)
FNZ105 TC.K.2 Nut for bracket (4) -(hose, front suspension, Twin Cam)
FNZ105 TC.K.3 Nut for screw (8/6) -(spring pan to wishbone, front suspension, Twin
Cam) -quantity reduced at (C)2275
FNZ105 TC.K.3 Nut for bolt (4) -(check rubber to member, front suspension, Twin Cam)
FNZ105 TC.K.4 Nut for screw (4) -(housing for bush, anti-roll bar to frame, Twin
Cam) -Com.(C)2275
FNZ105 TC.M.1 Nut for screw (2) -(cover plate to base plate, brake controls, Twin
Cam)
FNZ105 TC.M.1 Nut for screw (2) -(pedal box to bulkhead, brake controls, Twin Cam)
FNZ105 TC.M.1 Nut for screw (6) -(pedal box to bracket, brake controls, Twin Cam)
FNZ105 TC.M.1 Nut for screw (2) -(blanking plate, brake controls, Twin Cam)
FNZ105 TC.M.2 Nut for screw -(3-way connection and cable clip to rear axle, brake
controls, Twin Cam)
FNZ105 TC.M.4 Nut for screw (8) -(hand brake to gearbox cover, handbrake, Twin Cam)
FNZ105 TC.M.4 Nut for bolt -(operating lever, handbrake, Twin Cam)
FNZ105 TC.M.5 Nut -abutment -(handbrake, Twin Cam)
FNZ105 TC.N.9 Nut for screw (2) -(bracket to bumper blade, fog lamp, road lamps,
electrical, Twin Cam) -optional
FNZ105 TC.N.10 Nut for screw (2) -(flasher unit to dash, flasher-horn controls,
electrical, Twin Cam)
FNZ105 TC.N.10 Nut for screw (2) -(horn bracket to R/H front extension, low note,
flasher-horn controls, electrical, Twin Cam)
FNZ105 TC.N.12 Nut for screw (3) -(wing bolt clips and earth wire, cables and
connections, electrical, Twin Cam)
FNZ105 TC.N.12 Nut for screw -(battery cable to earth, cables and connections,
electrical, Twin Cam)
FNZ105 C.Q.1 Nut for screw (6) -(bracket assembly to front extension, chassis frame,
Twin Cam)
FNZ105 TC.Q.2 Nut for screw (8) -(body to front and rear frame brackets, body
mounting, Twin Cam)
FNZ105 TC.R.20 Nut for bolt (2) -(corner bar to center bar, front bumper assembly,
Twin Cam)
FNZ106 15.A.16 Nut for stud (4) -(carburetor to manifold, 1500)
FNZ106 15.H.4 Nut for bolt (8)(rear brake plate) -(rear brakes, 1500)
FNZ106 15.H.5 Nut for shackle plate (4)
FNZ106 15.H.5 Nut for "U" clip (16) (double nutting U-bolts)
FNZ106 15.H.5 Nut for rebound strap to axle (2)
FNZ106 15.K.2 Nut for stud (8 shock absorber to cross member)
FNZ106 15.K.2 Nut for bolt -(8 brake plate to steering knuckle)
FNZ106 15.M.1 Nut for pedal bracket bolt -(pedal pivot)
FNZ106 15.M.2 Nut for master cylinder to box bolt (2) -(brake controls, 1500)
FNZ106 15.Q.1 Nut for extension to frame bracket screw (8) -(chassis frame, 1500)
FNZ106 15.Q.1 Nut for rebound starp spindle (2 on frame)
FNZ106 15.R.20 Nut for main spring to corner bar bolt (2) -(front bumper ass'y)
FNZ106 15.R.20 Nut for main spring centre bolt -(front bumper assembly)
FNZ106 15.R.20 Nut for main mainspring to bar bolt (2) -(rear bumper assembly)
FNZ106 15.R.21 Nut for main mainspring to bar bolt (2) -(rear bumper assembly)
FNZ106 16.A.15 Nut -stud (4) -(carbs to manifold, engine unit, 1600)
FNZ106 16.H.1 Nut -rebound spindle (2) -(rear axle, 1600 and 1600-MK-II)
FNZ106 16.H.5 Nut -rebound spindle (2) -(rear axle, ARDB model, 1600 and
1600-MK-II) Com.(C)91240
FNZ106 16.H.7 Nut -bolt (8) -(caliper mounting, rear axle, ARDB model 1600 and
1600-MK-II) -Com.(C)100352
FNZ106 16.H.10 Nut -shackle plate pin (4) -(rear spring, 1600 and 1600-MK-II)
FNZ106 16.H.10 Nut -U-clip (16) -(rear spring, 1600 and 1600-MK-II)
FNZ106 16.H.10 Nut -rebound strap to axle (2) -(rear spring, 1600 and 1600-MK-II)
FNZ106 16.K.4 Nut -stud (8) -(shock absorber, front suspension, 1600 and 1600-MK-II
std.model)
FNZ106 16.M.1 Nut -bolt -(pedal to bracket, brake controls, std.model, 1600 and
1600-MK-II)
FNZ106 16.M.2 Nut -bolt -(pedal to bracket, brake controls, ARDB model 1600 and
1600-MK-II)
FNZ106 16.M.3 Nut -bolt (2) -(master cylinder to box, std.model 1600 and 1600-MK-II)
FNZ106 16.Q.1 Nut -screw (8) -(exenion to frame bracket, chassis frame, 1600 and
1600-MK-II)
FNZ106 16.Q.1 Nut -rebound strap spindle (2) -(chassis frame, 1600 and 1600-MK-II)
FNZ106 16.R.20 Nut -bolt -mainspring to center bar -(front bumper assembly, 1600 and
1600-MK-II) -changed to ACH9287
FNZ106 16.R.20 Nut -bolt -mainspring to corner bar (2) -(front bumper assembly, 1600
and 1600-MK-II)
FNZ106 16.R.21 Nut -bolt (2) -(mainspring to bar outer, rear bumper assembly, 1600
and 1600-MK-II) -changed to 1G9872
FNZ106 16.R.21 Nut -bolt (2) -(mainspring to bar inner, rear bumper assembly, 1600
and 1600-MK-II)
FNZ106 TC.A.21 Nut for manifold stud (5) -(inlet, engine, Twin Cam)
FNZ106 TC.H.1 Nut for manifold stud (10) -(carrier, rear axle, Twin Cam)
FNZ106 TC.H.2 Nut for bolt (8) -(adapter plate to axle case,caliper mounting, rear
axle, Twin Cam)
FNZ106 TC.H.5 Nut for shackle plate (4) -(rear spring, Twin Cam)
FNZ106 TC.H.5 Nut for "U" clip (16) -(rear spring, Twin Cam)
FNZ106 TC.H.5 Nut rebound strap to axle (2) -(rear spring, Twin Cam)
FNZ106 TC.K.3 Nut for stud (8) -(shock absorber to cross member, front suspension,
Twin Cam)
FNZ106 TC.M.1 Nut for bolt -(pedal to bracket, brake controls, Twin Cam)
FNZ106 TC.Q.1 Nut for screw (8) -(extension to frame bracket, chassis frame, Twin
Cam)
FNZ106 TC.Q.1 Nut -rebound strap spindle (2) -(chassis frame, Twin Cam)
FNZ106 TC.R.20 Nut for bolt -(spring bar to center bar, front bumper assembly, Twin
Cam)
FNZ106 TC.R.20 Nut for bolt (2) -(spring bar to corner bar, front bumper assembly,
Twin Cam)
FNZ106 TC.R.21 Nut for bolt (2) -(spring bar to bumper bar outer, rear bumper
assembly, Twin Cam)
FNZ106 TC.R.21 Nut for bolt (2) -(spring bar to bumper bar inner, rear bumper
assembly, Twin Cam)
FNZ107 15.H.1 Nut (4) (for differential carrier studs)
FNZ107 15.H.5 Nut for front end bolt( 2) (rear leaf spings)
FNZ107 15.L.1 Nut for frame bolt (rear shock absorber, 1500)
FNZ107 15.R.21 Nut for bracket to frame bolt (4) -(rear bumper mounting, rear bumper)
FNZ107 16.H.10 Bolt -spring -front end (2) -(rear spring, 1600 and 1600-MK-II)
FNZ107 16.H.10 Nut -bolt (2) -(front end, rear spring, 1600 and 1600-MK-II)
FNZ107 16.L.1 Nut -bolt (2) -(shock absorber to frame, rear, 1600 and 1600-MK-II)
FNZ107 16.R.21 Nut -bolt (4) -(bracket, rear bumper assembly, 1600 and 1600-MK-II)
FNZ107 TC.H.5 Nut for front end bolt (2) -(rear spring, Twin Cam)
FNZ107 TC.L.1 Nut for bolt (4) -(shock bsorber to frame, rear shock absorbers, Twin
Cam)
FNZ107 TC.R.21 Nut for bolt (2) -(bracket to frame, (3-3/4") short, rear bumper
assembly, Twin Cam)
FNZ107 TC.R.21 Nut for bolt (2) -(bracket to frame, (4") long, rear bumper assembly,
Twin Cam)
FNZ107 TC.R.35 Nut for screw (2) -(distance piece at tunnel, early Seat Belts, Twin
Cam)
FNZ107 TC.R.35 Nut for screw (2) -(distance piece at tunnel, early Seat Belts, Twin
Cam)
FNZ107 TC.R.35 Nut for screw (2) -(distance piece at tunnel, late Seat Belts, Twin
Cam)
FNZ108 15.K.4 Nut -link to spring pan (2) -(anti-roll bar, 1500) -optional extra
FNZ108 15.L.1 Nut -link to bracket (rear shock link)
FNZ108 15.R.20 Nut for bumper support stud (4) -(front bumper assembly)
FNZ108 15.R.21 Nut for bracket and bumper stud (2) -(rear bumper mounting, rear
bumper)
FNZ108 16.K.5 Nut -link to pan (2) -(anti-roll bar, 1600 and 1600-MK-II std.model)-
optional extra
FNZ108 16.N.14 Nut -screw (3) -(clip to front panel, cables and connections, 1600
and 1600-MK-II)
FNZ108 16.R.20 Nut -bumper support stud (4) -(front bumper assembly, 1600 and
1600-MK-II)
FNZ108 16.R.21 Nut -stud (2) -(rear bumper assembly, 1600 and 1600-MK-II)-
Fin.(C)102380 -(changed to thin nut FNZ208 to allow distance piece)
FNZ108 16.R.5 Nut -screw -(clamp, tube assy, heater assy, heater, 1600 and
1600-MK-II)
FNZ108 TC.K.4 Nut link to spring pan (2) -(ARB, front suspension, Twin Cam)-
Com.(C)2275
FNZ108 TC.L.1 Nut link to bracket (2) -(rear shock absorbers, Twin Cam)
FNZ108 TC.R.20 Nut spring bar to stud (4) -(front bumper assembly, Twin Cam)
FNZ108 TC.R.21 Nut -spring bar to bracket (2) -(rear bumper assembly, Twin Cam)
FNZ204 15.D.2 Locknut for bolt (2) -(pump mounting, fuel pump, 1500)
FNZ204 15.N.1 Locknuts for battery fixing bolts (8)
FNZ204 15.N.10 Locknut to ramp screw clip -(neg.bat cable, cables+connections, 1500)
FNZ204 15.R.9 Locknut for clip scew -(rear ramp R/H neg.bat.cable)
FNZ204 16.D.2 Locknut -bolt -(fuel pump to frame, 1600)
FNZ204 16.N.1 Locknut -battey fiing bolt (8) -(battery, 1600 and 1600-MK-II)
FNZ204 16.N.15 Nut -lock -clip to ramp screw -(cables and connections, 1600 and
1600-MK-II)
FNZ204 TC.D.2 Locknut for bolt (4) -(pump mounting, fuel system, Twin Cam)
FNZ204 TC.M.5 Locknut battery fixing bolt (8) -(battery, Twin Cam)
FNZ204 TC.N.12 Nut for screw -(negative cable to rear ramp screw, cables and
connections, electrical, Twin Cam)
FNZ205 15.H.5 Locknut for locating bolt (rear leaf spring)
FNZ205 15.R.19 Locknut for bracket to bracket screw (2) -(rear number plate)
FNZ205 16.A.16 Nut -mounting to bracket (4) -(engine mtg, 1600)
FNZ205 16.E.4 Locknut -end -(clutch m/c, clutch controls, ARDB 1600) -Com.(C)91240
FNZ205 16.H.10 Locknut -bolt (2) -(center of spring, rear spring, 1600 and
1600-MK-II)
FNZ205 16.M.4 Locknut -pushrod -(brake master cylinder, ARDB model 1600 and
1600- MK-II)
Com.(C)91240
FNZ205 16.M.4 Locknut -fork end -(brake master cylinder, ARDB model 1600 and
1600-MK-II) Com.(C)91240
FNZ205 TC.E.2 Locknut -master cylinder pushrod -(clutch, Twin Cam)
FNZ205 16.R.19 Locknut -screw (2) -(lamp bracket to mounting bracket, number plate
rear, 1600 and 1600-MK-II)
FNZ205 TC.H.5 Locknut for locating bolt (2) -(rear spring, Twin Cam)
FNZ205 TC.M.2 Locknut -pushrod -(brake master cylinder, Twin Cam))
FNZ205 TC.R.19 Locknut for screw (2) -(lamp bracket to mounting bracket, rear,
number plates and fittings, Twin Cam)
FNZ206 15.A.16 Nut for stud (2) -(inlet manifold, accelerator abutment bracket,
exhaust and inlet manifold, 1500)
FNZ206 15.F.4 Locknut for bolt (clutch release arm) -changed to LNZ206 Com.(E)4525
FNZ206 15.K.2 Nut -drum to hub -(12 for rear drum brakes wire wheels)
FNZ206 15.R.18 Nut -(striker pin assembly, bonnet catch control)
FNZ206 16.A.15 Nut -stud (2) -(accelerator abutment bracket, engine unit 1600)
FNZ206 16.H.4 Nut -bolt (8) -(brake plate to axle case, rear brakes, 1600 and
1600-MK-II)
FNZ206 16.M.5 Locknut (2) -(front brake hose, hyd.pipes +fittings, std.model 1600
and 1600-MK-II)
FNZ206 16.M.6 Locknut -hose (4) -(front brake hose, hyd.pipes +fittings, ARDB model
1600 and 1600-MK-II)
FNZ206 16.R.18 Nut -(striker pin assembly, bonnet fittings, 1600 and 1600-MK-II)
FNZ206 TC.M.2 Locknut -hose (4) -(front, hyd.pipes+fittings, Twin Cam)
FNZ206 TC.R.18 Nut -(striker pin assy, bonnet fittings, Twin Cam)
FNZ207 15.A.11 Nut for hub (w-pump) [Fin(E)GB39864ex39401-39525]
FNZ207 15.N.1 Nut for pulley (dynamo)
FNZ208 15.R.32 Nut for side curtain peg socket (2) -(trimming, 1500 Tourer)
FNZ208 16.R.21 Locknut -stud (2) -(rear bumper, 1600 and 1600-MK-II) Com(C)102381-
Add distance piece in place of flat washer, and change FNS108 thick nut to thin nut.
FNZ208 16.R.32 Nut -peg socket (2) -(side curtain, timming, 1600 and 1600-MK-II
Tourer)
FNZ208 TC.A.8 Nut for pivot -(chain adjuster fork, camshaft, engine, Twin Cam)-
changed to AEH623 Com.(E)329 -always supply AEH623 priior to (E)329
FNZ208 TC.R.13 Nut -sidescreen peg socket -(door fittings, Tourer, Twin Cam)
FNZ210 16.J.1 Locknut -tie rod (2) -(rack assy, steering, 1600 and 1600-MK-II)
FNZ308 15.K.3 Nut for bolt (2 wishbone to lower swivel link)
FNZ308 16.K.4 Nut -bolt (2) -(wishbone to lower swivel link, front suspension, 1600
and 1600-MK-II std.model)
FNZ308 16.K.4 Nut -bolt (2) -(wishbone to upper swivel link, front suspension, 1600
and 1600-MK-II std.model)
FNZ308 TC.K.3 Nut -bolt (2) -(bottom wishbone to link -(front suspension, Twin Cam)
FNZ308 TC.K.3 Nut -bolt (2) -(shock absorber to link, front suspension, Twin Cam)
FNZ407 15.J.2 Nut for ball socket (2) (tie rod end) -(steering, 1500)
FNZ407 16.J.2 Nut ball socket (2) -(tie rod end, steering, 1600 and 1600-MK-II)
FNZ407 TC.J.1 Nut for ball socket (2) -(tie rod end, steering, Twin Cam)
FNZ408 15.K.3 Nut for wishbone pivot (slotted) (4)
FNZ408 16.K.4 Nut -slotted -wishbone pivot (4) -(front suspension, 1600 and
1600-MK-II std.model)
FNZ408 TC.K.3 Nut -wishbone pivot (4) -(front suspension, Twin Cam)
FNZ412 15.K.1 Nut for steering knuckle (R.H.T.)
FNZ505 15.F.4 Nuts for mounting plate bolts (6) (gearbox to mounting plate)
FNZ505 16.F.4 Nut -bolt (7) -(gearbox to mtg.plate) -(gearbox, 1600 and 1600-MK-II)
FNZ505 TC.F.4 Nut -bolt (7) -(gearbox to mtg.plate, gearbox, Twin Cam)
FNZ506 15.A.4 Nut for flywheel bolt
FNZ506 15.A.12 Nut for dynamo mounting pillar to plate
FNZ506 sup.3 Nut -bolt (6) -(flywheel to crankshaft, engine unit, sup)
FNZ506 sup.11 Nut -piller -(dynamo and distributor mounting, engine unit, sup)
FNZ506 16.A.3 Nut -bolt (6) -(flywheel to crankshaft, engine unit, 1600)
FNZ506 16.A.11 Nut -dynamo pillar -(engine unit, 1600)
FNZ506 16.A.25 Nut -bolt (6) -(flywheel to crankshaft, engine unit, 1622)
FNZ506 16.A.25 Nut -dynamo pillar -(adj.link to pillar, engine unit, 1622)
FNZ506 16.K.1 Nut -bolt (8) -(adapter plate to knuckle, front suspension, 1600 and
1600-MK-II std.model)
FNZ506 16.K.1 Nut -bolt (8) -(brake disc to hub, disc wheels, front suspension, 1600
and 1600-MK-II std.model) Com.(C)69505 (changed from studs to bolts)
FNZ506 16.K.1 Nut -bolt (brake disc to hub) (8) (wire wheels) -(front suspension,
1600 and 1600-MK-II std.model) Com.(C)70276 (change from studs to bolts)
FNZ506 TC.A.5 Nut for bolt (6) -(flywheel to crankshaft, engine, Twin Cam)
FNZ507 15.H.3 Nut -drum retaining (wire wheels only) (rear axle)
FNZ507 16.H.3 Nut -drum retaining (8) -(rear, wire wheels, 1600 and 1600-MK-II)
FNZ508 16.L.1 Nut (2) -(bottom, link, rear shock absorber, 1600 and 1600-MK-II)-
alternate FNZ507
FNZ612 15.F.3 Nut for shaft and speedometer gear - Com.(E)GD101 -was 11G3225)
FNZ612 15.H.2 Nut for flange (differential input, 1500)
FNZ612 16.F.2 Nut -3rd motion shaft flange -(gearbox, 1600 and 1600-MK-II)
FNZ612 16.H.2 Nut to pinion -(differential input, rear axle, 1600 and 1600-MK-II)
FNZ612 16.H.6 Nut for pinion -(differential front, rear axle, ARDB model, 1600 and
1600-MK-II) -Com.(C)91240
FNZ612 TC.F.3 Nut for flange -(3rd motion shaft, gearbox, Twin Cam)
FNZ612 TC.H.2 Nut for pinion -(rear axle, Twin Cam)
FNZ2412 15.K.1 Nut for steering knuckle (L.H.T.)
|
