The MGA With An Attitude
MGAguru.com MGAguru.com
ALUMINUM RADIATOR, Ron Davis - CO-304

This one supplied by Ron Davis is close to original configuration with downflow plus filler neck and hose pipes in original locations. You will need a small drain hose on the overflow pipe (like nearly all custom built radiators), but that is also a good opportunity to install a coolant recover bottle. The core and bottom tank are 2" thick, compared to 2-1/4" thick for thr original cell core radiator. Beware that some aftermarket radiators may be 2-1/2" thick, which may cause interference at the MGA air pan panel.

No performance report on this one yet.

HomeBackTop
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2017 Barney Gaylord -- Copyright and reprint information