The MGA With An Attitude
ROLL BAR, Vintage/Period Style #2 - FR-304

On 6/12/2010, Mike Ellsmore wrote:
"The removeable roll bar on my MGA may be of interest. It was constructed by a local company that specialises in rally car products. When built it was CAMS approved for racing but now it would not meet latest regulations as it has no rear support. It is still okay for club competition such as Sprints and hillclimbs. It is built to be removeable. You need to remove the hood frame to install. It is quit high but that is because for CAMS it needs to be 2" above the top of your crash helmet".

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2010 Barney Gaylord -- Copyright and reprint information