The MGA With An Attitude
Rolling CHASSIS DOLLY #2 - RT-211A
Information for this one is supplied by Bill James in Southport, NC, USA

"I built a dolly out of Aluminium Tubing. The tubing is attached to the 4 main Frame bolt hole points on the body. The tubing is then attached to other tubing using steel collers I welded together".
body dolly alumimum body dolly alumimum
For a single restoration job the cutting and welding may be a bit much for most home hobby folks, but otherwise it is very nice. Loosen a few bolts and it breaks down to store on a shelf.

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2012 Barney Gaylord -- Copyright and reprint information