The MGA With An Attitude
COTTER PIN REMOVER Tool for Wire Wheel Splined Hub - TS-215

On 23 June 2013, Art Pearse in Ontario, Canada wrote:
"I had to take the front WW hub off and was faced with the task of removing the cotter pin from the wheel nut. Well it got in a position where I could not straighten the pin legs through the hole in the splined hub. So I made an extractor using a 5/16 bolt. Worked great".

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2013 Barney Gaylord -- Copyright and reprint information