The MGA With An Attitude
MGAguru.com MGAguru.com
LIFT-THE-DOT TECH - TT-101-3A - (pg 3 of 13)

Here's another home made hole cutter idea from John Pipe.

Select a small socket of the right size. Used the Dremel or other, to grind out a the center. Mine started to grab after a few seconds, so I used a grinding wheel around the outside to give a cutting edge. Then attach the modified socket to a drill and drill out the hole against a wooden backing plate.

Making a hole punch
Home made hole punch #2
HomeBackNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2007 Barney Gaylord -- Copyright and reprint information