|The MGA With An Attitude
FLYWHEEL To CRANKSHAFT BOLT TORQUE - FW-102
Error in Workshop Manual
At 05:18 AM 1/21/06, Gordie Bird wrote:
>"Re: Clutch to flywheel torque. Reading my MGA shop manual, I find 2 possible entries. One states "Clutch assembly to flywheel 25 lb.ft." and a few lines further down states "Clutch to flywheel bolts 35 to 40 lb.ft.". This sounds like the same bolts to me. Can anyone enlighten me"?
It's a misprint.
The second one with higher torque should read:
"Flywheel to crankshaft bolts - 35 to 40 lb.ft."
Bottom of page General Data 3