|The MGA With An Attitude
HEATER CONTROL - Restoration - HR-104A
At 08:12 PM 3/11/2014 -0700, Jim Cheatham wrote:
"I purchased a new heater control panel from Scarborough Faire, a new "B" blower knob and the correct red fiber washers from Anglo Parts (ones with the right size hole finally came), and a correct long screw from Clarke Spares (Todd Clarke also has the correct red fiber washers). All other parts from my heater control (i.e. blower switch, cables, the two round knobs, spacers, the other long screw etc.) are original and were cleaned up. I bead blasted the original cable covers and clear-coated them. Thought you might like to see the before and after pictures".