The MGA With An Attitude

This sway bar is another aftermarket type very similar to the prior page. The bar itself appears identical with flat ends and the bends very close to the frame mount brackets (but only 5/8-inch diameter bar in this case).

Aftermarket sway bar attached underneath
Aftermarket type anti-sway bar attached to bottom of front frame extension.

The lower A-arms are early style with no reinforcing plate in front, and the hole for link attachment is drilled through these parts. I haven't seen this type of end link before, so the original source is unknown. The frame brackets and rubber bushings with trapezoidal shape are similar to parts I bought from Victoria British around turn of the century (very common).

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2014 Barney Gaylord -- Copyright and reprint information