The MGA With An Attitude
ROCKER PANELS, Sports and Classics - RT-402SC1

I bought outer rocker panels from Sports and Classics in early 2008. I was pleased with them overall, especially compared to parts from other sources. They needed a firm hand squeeze to reduce overall height slightly at the welding flanges, and a minor bit of trimming around the A-post interface, otherwise fit quite well. See photo report here: rt624.htm -- Barney

The "sports and classics" rocker panels (about $160 per pair) were made in UK in late 70's. They are dimensionally very close, but inconsistent, particulary along the upper mounting flange (which on the set I got from a different supplier was too short to spot weld, about 3/8" tall instead of 1/2"). -- Timothy Trevithick

Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2010-2011 Barney Gaylord -- Copyright and reprint information