The MGA With An Attitude
MGAguru.com MGAguru.com
MGA RESTORATION TECH - Page 1
Also see index Page 0 - Page 2 - Page 3 - Page 4 - Page 5

"ATTITUDE ADJUSTMENT" - Body Sill Replacement
before and after slides
RT-601 - Body Sills - First Disassembly, doors, seats, trim
RT-602 - Body Sills - More Disassembly, shut face, rear wings
RT-603 - Body Sills - More Disassembly, front wings, rocker panels
RT-604 - Body Sills - The Skeleton and Garage Hangings
  box_section.gif - Body Sills - Drawing, box panel front end
RT-605 - Body Sills - B-Pillar Opening and Inspection
RT-606 - Body Sills - Outer Sill Box Removal
RT-607 - Body Sills - Inner Sill Panel Removal
RT-608 - Body Sills - Sill Removal, Left Side
RT-609 - Body Sills - Sand Blasting
RT-610 - Body Sills - Inner Sheet Metal Fitting
  plate2.gif - Body Sills - Drawing, Inner Sill Center Plate
RT-611 - Body Sills - Gussets and Panel Flanging
  gusset_fr.gif - Body Sills - Drawing, Inner Sill Front Gussets
RT-612 - Body Sills - Making Curved Flanges - (B-Post)
RT-612A - Body Sills - B-Post Rear Panel
  b_post_rear_1.pdf - Template for wood Forming Block, B-Post Rear
  b_post_rear_2.pdf - Template for metal Panel Flat, B-Post Rear
  b_post_rear_3.pdf - Fitting drawing for B-post back plate
RT-613 - Body Sills - First Spot Welding
RT-614 - Body Sills - Box Panel Forming
  box_left_end.gif - Body Sills - Drawing, Sill Box Front End
  box_dwg.gif - Body Sills - Drawing, Sill Box For Left Side
RT-614A - Body Sills - Holes in Top of Sills
RT-614B - Body Sills - Box Panel Forming, Simpler
  box_left_end_2.gif - Body Sills - Drawing, Sill Box Front End 2
  box_dwg2.gif - Body Sills - Drawing, Sill Box For Left Side 2
RT-614C - Body Sills - Box Panel Forming, Pictures
RT-615 - Body Sills - Box Panel Gussets and Welding
  gussets.gif - Body Sills - Drawing, Gussets and End Plates for Sill Box
  box_weld.gif - Body Sills - Drawing, Welding for Sill Box
RT-616 - Body Sills - Inner Sill Panel and Box Assembly
RT-617 - Body Sills - Anatomy of a B-post Repair
RT-618 - Body Sills - Painting Inside the Sill Boxes
RT-619 - Body Sills - Sill and Pillar Welding onto Body
RT-620 - Body Sills - Closing the B-Post
RT-621 - Body Sills - Sill Plate Replacement
RT-622 - Body Sills - Old is New - Time to Remove the Body
  gusset_fr.gif - Body Sills - Drawing, Inner Sill Front Gussets
  gusset_rear.gif - Body Sills - Drawing, Rear Gussets for B-Post
RT-623 - Body Sills - Weld Touch-up, Cleaning, Painting
RT-624 - Body Sills - Rocker Panel Install, Red
RT-624A - Body Sills - Rocker Panel Install, What Fits
RT-625 - Body Sills - Doglegs, Shutface, Repairs,Alignment
RT-626 - Body Sills - Fiberglass Front Valance Panel Repair
RT-627 - Body Sills - Outer Body Stripping and Priming
RT-627A - Body Sills - Holes in Lower Edge of Body Sill
RT-628 - Body Sills - Outer Body Surface Finishing
RT-629 - Body Sills - Inner Body Painting
RT-630 - Body Sills - Outer Body Painting
RT-631 - Body Sills - Final Wet Sanding and Buffing
RT-632 - Body Sills - Body Installation
RT-632A - Body Sills - Body Assembly
RT-633 - Body Sills - Body Trim and Fixtures
RT-634 - Body Sills - Final Assembly
RT-635 - Body Sills - Roll Out and Drive

Go to Page 0 for:
You are here Page 1 for:
Go to Page 2 for:
Go to Page 3 for:
Go to Page 4 for:
Go to Page 5 for:
General Restoration Information.
MGA Body Sill Replacement.
Important Restoration Projects.
The Power of Wishful Thinking.
Panels That Fit, or Don't Fit.
Body Panels, Repair, Replacement,Welding.

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2000-2013 Barney Gaylord -- Copyright and reprint information